Turning the projector power on
◆Turning the power on
Always remove the lens cap before operating the main unit.
STANDBY/ON | STANDBY/ON | 1. Insert the supplied power cable |
| firmly into the AC inlet at the rear | |
| indicator | |
ESCAPE | MENU | of the main unit, then insert the |
PATTERN | SETTING | plug into an AC outlet. |
LAMP COVER TEMP FAN | INPUT | The STANDBY/ON indicator lights orange. |
ASPECT |
|
AC inlet
button STANDBY/ON button
AUTO
STANDBY/ON
V. POS | ZOOM | FOCUS |
IRIS SETTING PATT
ESCAPE | MENU |
ESCAPEMENU
PATTERN
SETTING
|
| ASPECT | INPUT |
ASPECT | INPUT | LAMP COVER TEMP | FAN |
|
|
Remote Control | Main unit |
2. Press the STANDBY/ON button
(the |
|
| button on the remote |
|
control).
The indicator blinks green and the lamp lights up in preparation for projection. After approximately 35 seconds, the indicator changes from blinking to solid green, indicating that the unit is ready to project.
Warning
•Do not remove the power cable while the STANDBY/ON indicator is blinking green or lit steady green. This could damage the lamp or reduce lamp life.
6
Projection
13