Message display
Message | Condition |
|
|
No Signal | The unit is not receiving or detecting any signal at the selected input jack. This message is |
| displayed together with the name of the input source selected with the INPUT button. |
|
|
INPUT A (Component) (Example) | The input name selected by the INPUT button is displayed. It will turn off 2 seconds after |
| the signal has been input. |
|
|
Out Of Range | The unit is not able to decode the PC or HDMI signal currently being input. |
|
|
Unknown Format | The unit is not able to decode the video signal currently being input. |
|
|
Auto Sync... | The unit is setting itself to the most appropriate configuration for the RGB signal currently |
| being received. |
|
|
Memory | The memory setting number is displayed for 2 seconds. |
|
|
The lamps has reached its recommended | This message is displayed when the power switch is turned on if the lamp running time |
replacement time. Please replace with a new | exceeds 2000 hours. Press the ESCAPE button to remove the message. |
one. |
|
|
|
Press again to enter standby. | Press the STANDBY/ON button once more to place the unit in standby mode. |
|
|
Lens Adjustment is locked. | This message will display for 2 seconds if you press the V. POS, ZOOM, or FOCUS buttons |
| when the [Lens Adjustment Lock] is set to [On]. |
|
|
Invalid Operation | Appears in the menu operation guide when you press an invalid button during menu |
| operation. This message displays for 2 seconds. |
|
|
58