◆Main unit <Rear panel / Connections>

Rear remote control sensor

 

q

 

 

 

w

e

r

 

 

 

 

 

OUT

 

IN

 

 

HDMI

 

 

 

 

REMOTE

RS-232C

TRIGGER OUT

INPUT B

 

 

INPUT A

 

 

 

 

 

RGB/YPBPR/YCBCR

D4 VIDEO

G/Y

B/PB/CBR/PR/CR

HD/SYNC

VD

 

S VIDEO

VIDEO

1

2

3

4 5

6

7

 

8

9 0

3

and Controls functions

1INPUT B (D-sub 15 pin)

Receives component video and RGB (RGB/YPBPR/YCBCR) signals. Use a D-sub monitor cable to connect components to this jack.

2D4 VIDEO (D jack)

Receives signals output from the D jacks of other AV components. It is compatible with D1 - D4 formats.

3- 7 INPUT A (BNC jacks)

Receive component video and RGB signals. Connect component signal connectors from AV components to input jacks 3 - 5, and RGB signal connectors from computers to

input jacks 3 - 7. Use BNC cables for these connections.

3 G/Y

(G, or luminance signal)

4B/PB/CB (B, or color difference signal)

5 R/PR/CR (R, or color difference signal)

6 HD/SYNC (Horizontal sync signal, composite sync signal)

7 VD

(Vertical sync signal)

9AC inlet

Insert the supplied AC power cable here.

0VIDEO (Pin Jack)

Receives composite video signals from the VIDEO output jacks of other AV components. Use a video pin cable for these connections.

qHDMITM (HDMITM jack)

Receives HDMITM signals from computers or AV components.

wREMOTE IN / OUT jack

Connect the remote control to the REMOTE IN jack if you want to use it through a cable. The REMOTE OUT jack outputs the signal received through the REMOTE IN jack without any change.

eRS-232C (D-sub 9 pin)

For use in servicing this unit.

8

S VIDEO (Mini DIN jack)

r TRIGGER OUT

 

Receives signals from S-VIDEO output jacks of other AV

Outputs control signals to external components. This output

provides a potential of 12 V/ maximum 200 mA when this unit

components. Use an S-VIDEO cable for these connections.

is projecting. Use the supplied trigger-out DC plug (for US

 

 

model only) to control external components.

5