Turning the projector power on

◆Placing the DPX-1100 in standby mode

button STANDBY/ON button

AUTO

STANDBY/ON

V. POS

ZOOM

FOCUS

IRIS SETTING PATT

ESCAPE

MENU

ESCAPEMENU

PATTERN SETTING

 

 

ASPECT

INPUT

ASPECT

INPUT

LAMP COVER TEMP

FAN

 

 

Remote Control

Main unit

1. Press the STANDBY/ON button.

A confirmation message appears on the screen.

Press again to enter standby.

2. If you wish to place the DPX-1100 in standby mode, press the STANDBY/ON button again.

The lamp changes to a half lit state, and the fan activates for 2 minutes to cool the lamp. During this time, the STANDBY/ON indicator blinks orange, and pressing STANDBY/ON does not turn main unit power on again. When the unit finishes cooling, the fan stops, and the STANDBY/ ON indicator turns orange.

 

Memo

 

• The lamp may blink when half lit. This is not a defect.

 

Warning

 

• Do not remove the power cable while the STANDBY/ON indicator is blinking green

 

or when the fan is activated. This could damage the lamp or reduce lamp life.

AC inlet

3. If you do not plan to use the main

 

unit for a long period of time,

 

attach the lens cap and remove

 

the plug from the AC outlet.

 

Warning

 

• Condensation may appear on the unit if the temperature of the surrounding

 

environment changes quickly. Condensation may also cause the projected image to

 

be cloudy. Place the unit in standby mode until the condensation disappears.

 

Switching the unit on when condensation is present may damage the unit.

14