10Installation

Setting up the DPX-1100

There are four ways of mounting the projector.

Mounting method

Projection method

 

 

Placed on a table

A: From in front of a screen

 

B: From behind a semi-translucent screen

 

 

 

Mounted on the

C: From in front of a screen

ceiling

 

D: From behind a semi-translucent screen

 

 

◆Mounting the projector on a table

A: From in front of a screen

Place the unit on a table to project and view the image from in front of the screen. Usually, place the unit on a reasonably high table. The height from the bottom of the unit to the center of the lens is 12.4cm (4”-7/8).

B: From behind a screen (using a semi-translucent screen)

Place the unit on a table to project and view the image from behind a semi-translucent screen. The distance between the projector and the screen should be the same as “A: From in front of the screen”.

•Set the [Location] menu item in the [Setup] menu group to [Rear/Table]. (☞ page 22 - 40)

◆Mounting the projector on the ceiling

There are two kinds of brackets (low ceiling and high ceiling, sold separately), which you can use to mount the projector on the ceiling. Please consult your dealer for details on their use, and have installation done by either your dealer or a reputable contractor.

C: From in front of a screen

Mount the unit on the ceiling to project and view the image from in front of the screen. The distance between the projector and the screen should be the same as “A: From in front of the screen”.

•Set the [Location] menu item in the [Setup] menu group to [Front/Ceiling]. (☞ page 22 - 40)

D:From behind a semi-translucent screen

Mount the unit on the ceiling to project and view the image from behind a semi-translucent screen. The distance between the projector and the screen should be the same as “B: From behind a screen”.

•Set the [Location] menu item in the [Setup] menu group to [Rear/Ceiling]. (☞ page 22 - 40)

48