Manuals / Brands / Home Audio / Stereo Amplifier / Yamaha / Home Audio / Stereo Amplifier

Yamaha DSP -A780 GENERAL INSTRUCTIONS FOR CONNECTIONS, CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT TO THIS UNIT

1 42

Download 42 pages, 595.32 Kb

GENERAL INSTRUCTIONS FOR CONNECTIONS

Make sure that you have the left (L) and right (R) channels correctly connected. That means that jacks marked “L” on this unit must be connected to jacks marked “L” on other units. Likewise with the “R” jacks. This is easy if you remember to always use the red plug for the “R” jacks and the other plugs for the “L” jacks.

With speaker connections you must also be sure that the polarity is correct. For each amplifier and each channel, connect the plus (+) terminal of the amplifier to the plus terminal of the speaker, and connect the minus (–) terminal of the amplifier to the minus terminal of the speaker. To keep track of polarity, use a speaker cable that has one of the two wires marked by a stripe or a different color.

CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT TO THIS UNIT

CD player

OUTPUT

Tuner

OUTPUT

Tape deck

LINE OUT

LINE IN

Monitor TV

VIDEO IN

Video disc player

AUDIO OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

Video cassette recorder 1

AUDIO OUT

VIDEO OUT

AUDIO IN

VIDEO IN

Video cassette recorder 2

AUDIO OUT

VIDEO OUT

TV/Satellite tuner

10

Contents

DIGITAL SOUND FIELD PROCESSING AMPLIFIER OPERATION MANUAL CONTENTS PRECAUTIONS & SAFETY INSTRUCTIONS We Want You Listening For A Lifetime Page SETUP & ADJUSTMENT 1-1.GETTING STARTED Unpacking Installing the Remote Control Unit Batteries Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP VIDEO SUPERIMPOSE Setting Up Your Speaker System 5 Speaker System Use of the Center Dialog Speaker Is Recommended Speakers and Speaker Placement 1-2.SETUP REAR PANEL Page GENERAL INSTRUCTIONS FOR CONNECTIONS CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT TO THIS UNIT CONNECTING TO S VIDEO JACKS Notes about the Video superimpose CONNECTING SPEAKER SYSTEMS For connecting to the MAIN and CENTER SPEAKERS terminals For connecting to the REAR SPEAKERS terminals CONNECTING THE MAIN SPEAKERS AND THE REAR EFFECT SPEAKERS TO THIS UNIT CONNECTING THE CENTER SPEAKER(S) TO THIS UNIT For connecting one CENTER speaker For connecting two CENTER speakers ADDING A SUBWOOFER ADDITIONAL INFORMATION ON CONNECTING SPEAKERS (for Europe, U.K. and Australia models) 1-3.CONTROLS & ADJUSTMENTS FRONT PANEL Page REMOTE CONTROL UNIT Page 1-4.ADJUSTMENT MAIN/CENTER/REAR EFFECT SPEAKER LEVEL BALANCE ADJUSTMENT INPUT LEVEL ADJUSTMENT OTHER IMPORTANT SETTINGS AND ADJUSTMENTS IN THE “SET MENU” MODE INPUT TRIM CENTER MODE DIMMER MEMORY GUARD 3.Changing brightness of the display (DIMMER) 4.Locking DSP parameters and other adjustments (MEMORY GUARD) GENERAL OPERATION 2-1.PLAYING A SOURCE 2-2.RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER) To record a source other than the input source to be played REC OUT CD Page 2-3.DIGITAL SOUND FIELD PROGRAMS 2-4.SELECTING SOUND FIELD PROGRAMS 2-5.MUTING THE EFFECT SOUND 2-6.SUPERIMPOSED VIDEO PROGRAM/PARAMETER DISPLAY 2-7.DESCRIPTIONS OF THE SOUND FIELD PROGRAMS Page Page Page CREATING YOUR OWN SOUND FIELDS 3-1.SELECTING AND EDITING PROGRAM PARAMETERS WHAT IS A SOUND FIELD THE ELEMENTS OF A SOUND FIELD Page 3-2.DESCRIPTIONS OF THE DIGITAL SOUND FIELD PARAMETERS ● INIT DLY (Initial Delay) ● ROOM SIZE ●REV. TIME (Reverberation Time) ●EFCT TRIM (Effect Trim) ●DELAY TROUBLESHOOTING SPECIFICATIONS Video Section Power Supply Power Consumption AC Outlets