To record a source other than the input source to be played

This unit has a function of selecting a source to be recorded to tape deck or VCRs independent of the selection of input source.

...

1. Press the REC OUT switch (so that “REC OUT” appears on the display and the monitor screen).

Front panel

2.Within 5 seconds after the REC OUT switch is pressed, select the source to be recorded with an input selector switch.

Front panel

REC OUT CD

3.Press the REC OUT switch (so that the indicator corresponding to the selected source to be recorded stops flashing).

*The same result will be gained after 5 seconds automatically without any operation.

4.Play the source and confirm it by selecting it with an input selector switch and increasing the setting of the MASTER VOLUME control.

Front panel

5.Set the tape deck or VCR used for recording to the recording mode.

*Adjust the recording level on the tape deck or VCR.

6.While recording a source, you can enjoy listening to and/or watching another source selected with an input selector switch.

Front panelRemote control

TUNER

or

While recording, you can monitor the audio and/or video signals to be recorded by selecting the tape deck or VCR used for recording with an input selector switch.

26