2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER)

To record an input source to be played

...

1. Press the REC OUT switch (so that “REC OUT” appears on the display and the monitor screen).

Front panel

2.Within 5 seconds after the REC OUT switch is pressed, select the “SOURCE” position with the input selector switch (so that “REC OUT SOURCE” appears on the display panel and the monitor screen).

Front panel

REC OUT SOURCE

3.Press the REC OUT switch (so that the indicator corresponding to the selected source to be recorded stops flashing).

*The same result will be gained after 5 seconds automatically without any operation.

4.Select an input source to be played (and to be recorded). (See page 24 for the method of input source selection.)

Front panelRemote Control

CD

or

5.Play the source.

6.Set the tape deck or VCR used for recording to the recording mode.

*Adjust the recording level on the tape deck or VCR.

NOTE: To record picture from a video source and sound from another audio source, in step 4, first select a video source with an input selector key on the front panel, and then select an audio source with the input selector keys on the remote control unit.

25