CONNECTING THE EFFECT SPEAKERS TO THIS UNIT

Connect the FRONT effect speakers to the FRONT effect speaker output terminals of this unit.

If the FRONT effect speakers are not used, the FRONT MIX switch should be set to “ON”.

Connect the REAR effect speakers to the REAR effect speaker output terminals of this unit.

NOTE: The speaker connections above are fine for most applications. If for some reason, however, you wish to use an external power amp for any or all of the effect channels, connect the line level output jack(s) for each channel to the INPUT jacks of the external amp and connect the corresponding speaker pair to the speaker terminals of the external amp.

NOTE: If the pin plug is inserted in the FRONT/REAR EFFECT out jacks, the speaker output from the built-in amplifier will be cut off.

Front effect

Front effect

speaker

speaker

This unit

Rear effect

Rear effect

speaker

speaker

16