Yamaha DSP-A970 REMOTE CONTROL UNIT

REMOTE CONTROL UNIT	1 Transmit/Learn Indicator
	In Learn mode, lights to indicate that the key just pressed is ready
	for learning input. In User mode, blinks when a learned key is
	pressed to show that a control signal has been sent to your
	equipment.
	2 YPC/USER/LEARN Switch
	Set to YPC for operating this unit and Yamaha equipments. Set to
	USER for using learned key functions. Set to LEARN for learning
	new control functions. (See page 37.)
	(“YPC” is the abbreviation of YAMAHA Preset Code.)
	3 Power Key
	Turns this unit on and off.
	* (Europe model only): Turns the POWER on mode to the
	STANDBY mode and vice versa.
	4 Input Selector Keys
	Select the input sources to this unit.
	5 CD/LD Function Keys
	Operate functions on your Yamaha CD player and LD player.
	When the 1/2 Switch is set to 1, they operate the CD player, and
	when set to 2, they operate the LD player.
	6 Test Switch
	When pressed, sends a signal to the main left, center, main
	right, and rear effect speakers in turn, and when pressed once
	again, sends a signal to the main and front effect speakers in
	turn for easy comparison of level settings.
	7 Front Level +/– Keys
	Increase (+) or decrease (–) the volume level of the front effect
	speakers.

20