8Center Level +/– Keys

Increase (+) or decrease (–) the volume level of the center speaker(s).

9Rear Level +/– Keys

Increase (+) or decrease (–) the volume level of the rear effect speakers.

0Reset Button

Press this button to “reset” the internal microcomputer which controls remote control operations. Microcomputer “reset” is necessary when the remote control freezes.

*Pressing the RESET button will not erase learned functions.

AOn Screen Display Key

Changes the type of display showing the program name and parameters, or information about various settings/adjustments on the connected monitor’s screen.

Whenever pressed, the screen changes to a full display, simplified display and no display in turn.

BClear Button

Used in USER or LEARN mode to erase a learned function. (See page 38.)

CEffect On/Off Key

Cuts off the sound’s output from the front, rear effect and center speakers. To restore the output from those speakers, press this key again.

DParameter Select Keys

Select DSP program parameters, or titles of settings/adjustments in the SET/MENU mode.

EMuting Key

Mutes the master volume level by 20 dB. While muting, the indicator on the master VOLUME control flashes on and off continuously.

GParameter +/– Keys

Edit DSP program parameters, or used for five types of settings/adjustments in the SET/MENU mode.

HMaster Volume +/– Keys

Increase (+) or decrease (–) the master volume level.

IParameter/Set Menu Switch

When set to the PARAMETER position, the Parameter Select Keys and Parameter +/– Keys will set and edit DSP program parameters. When set to the SET MENU position, the Parameter Select Keys and Parameter +/– Keys are used to perform five types of settings/adjustments.

JProgram Select Keys (1 through 12) Select DSP programs 1 through 12.

KTuner Function Keys

Operate Yamaha tuner functions.

LTape Deck Function Keys

Operate Yamaha tape deck functions.

MBlank Keys

Have no preset functions, so are used for learning other remote controller’s functions only.

N1/2 Switch

When the YPC/USER/LEARN Switch is set to YPC, this switches the CD/LD Function Keys to keys for use with either the CD player or LD player. (“1” for the CD player and “2” for the LD player.) When the YPC/USER/LEARN Switch is set to USER or LEARN, this switch selects page 1 or 2 for the learnable function keys. (See page 37.)

English

21