5Input Trim Control
Adjusts the input level of each source respectively.
6Program Selector
Sequentially selects the digital sound field processing programs in the + or – direction.
6Display Panel
Shows program names, parameters and information about other various settings and adjustments.
7Effect Switch
Normally ON, this switch can be turned OFF to disable output from the center and effect speakers.
8Master Volume Control
Simultaneously controls signal level at all outputs: front effect, main, rear effect, center, and subwoofer. (This does not affect TAPE REC OUT level.)
9Phones Jack
Plug in headphones here for private listening. If the FRONT MIX and EFFECT switches are on, the effect channels will be heard along with the main channels. Otherwise the main channels only will be heard.
0Bass and Treble Controls
Adjust the sound to match your tastes. Can also be used to compensate for room acoustics. Defeated in the center position.
ABalance Control
Adjusts the left and right output volume to the Main Speakers to compensate for sound imbalance caused by speaker positions or listening room conditions.
BRec Out Switch
Used to select the source to be recorded to tape deck or VCR independent of the selection of input source. When pressed, the indicator corresponding to the currently selected source to be recorded flashes. While an indicator is flashing, you can change the selection of the source to be recorded with the input selector switches. The selected source is also shown by the display panel and the monitor screen (when the monitor is on).
CInput Selector Switch
Sequentially selects the input source that you want to listen to and/or watch in the © or ß direction. The indicator corresponding to the selected input source illuminates. The selected input source is also shown by the display panel and the monitor screen (When the monitor is on).
DInput Selector Switches for VCR 1, CD and LD Directly selects VCR 1, CD or LD as the input source.
EAuxiliary Input Jacks (AUX 2)
Connect an auxiliary video or audio input source equipment such as a camcorder to these jacks. If the connected video equipment has a S video output terminal, connect it to the S VIDEO jack to obtain a high resolution picture. The source connected to these jacks can be selected by the input selector switch.
English
19