Yamaha DSP-AZ1 ■Notes on the digital signal, Input modes and indications

BASIC PLAYBACK

Input modes and indications

This unit comes with various input jacks. If your external component is connected to more than one type of input jack, you can set the priority of the input signal. Press INPUT MODE on the front panel or an input selector button (press it repeatedly) on the remote control to display or change the input mode.

			V–AUX	TUNER	PHONO
INPUT MODE	CABLE	SAT	MD/TAPE	CD–R	CD
	D–TV/LD	VCR 1	VCR 2	VCR3/DVR	DVD

D–TV/LD	DVD		INPUT	DVD	VOLUME
VCR 1	TUNER						LFE
CABLE	MD/TAPE
SAT	CD–R
VCR 2	CD		AUTO:DTS		L	C		R
		DSP			SP	RC		RR
V–AUX	PHONO
VCR3/DVR					RL

A

■Notes on the digital signal

The digital input jacks of this unit can handle up to 192 kHz sampling digital signal. Both OPTICAL and COAXIAL input jacks can be used to input the digital signal up to 96 kHz. However when inputting the higher digital signals than 96 kHz, be aware the following points.

•DSP programs cannot be selected. Sound will be output as normal 2-channel stereo sound from only the left and right main speakers.

•Use the coaxial input (COAXIAL IN) jack to input over 96 kHz digital signal. The signals may not be correctly played back if the optical input (OPTICAL IN) jack is used.

Sound effects will be added to 96 kHz sampling digital signals after converted to 48 kHz.

Input mode

AUTO: This mode is automatically selected when you turn on the power of this unit. In this mode, the input signal is automatically selected in the following order.

1Digital signals

2 Analog signals

<When D-TV/LD is selected as the input source>

1Dolby Digital RF encoded signals

2 Digital signals

3 Analog signals

D.D.RF: This unit only selects Dolby Digital RF signals (when D- TV/LD is selected as the input source).

DTS: In this mode, only digital input signals encoded with DTS are selected even if other signals are input at the same time.

DGTL: This unit only selects digital signals input through the OPTICAL or COAXIAL jacks (when D-TV/LDis selected as the input source).

ANALOG: In this mode, only analog input signals are selected even if digital signals are input at the same time.

Cautions

•When you turn on the power of this unit, the input mode is set according to “9 INPUT MODE” on the SET MENU (see page 59 for details).

•When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the

COAXIAL jack.

E-44