SET MENU ITEMS

3 HP TONE CTRL (headphone tone control)

Use this feature to adjust the level of the bass and treble when you use your headphones.

3 HP TONE CTRL

≥ BASS

TRBL

-

+

 

0dB

Control range (dB): –6 – +3 for both BASS and TRBL (treble)

Initial setting: 0 dB for both BASS and TRBL (treble)

1 Select “BASS” or “TRBL”.

2 Press +/– to change each level.

4 CENTER GEQ (center graphic equalizer)

Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main

speakers.

4 CENTER GEQ

≥ 100Hz

300Hz

1kHz

3kHz

10kHz

-

+

 

0dB

Control range (dB): –6 – +6

Initial setting:

0 dB for 5-band

1 Press to select a higher frequency and to select a lower frequency.

You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.

2 Press +/– to adjust the level of that frequency.

Note

You can monitor the center speaker sound while adjusting this item by using the test tone. Press TEST before starting the foregoing procedure. “TEST DOLBY SUR.” (or “TEST DSP”) appears on the video monitor, and the test tone starts alternating among the speakers. Once you begin this procedure, the test tone remains at the center speaker and you can hear how the sound changes as you adjust the various frequency levels. To stop the test tone, press TEST (see pages 39 and 40).

5 REAR CT GEQ (rear center graphic equalizer)

Use this feature to adjust the built-in 5-band graphic equalizer so the rear center speaker tone matches that of the left and right rear speakers.

5 REAR CT GEQ

Control range (dB): –6 – +6

Initial setting:

0 dB for 5-band

 

 

≥ 100Hz

 

 

300Hz

1 Press to select a higher frequency and to select a lower frequency.

1kHz

3kHz

You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.

10kHz

-+

0dB

2 Press +/– to adjust the level of that frequency.

 

Note

You can monitor the rear center speaker sound while adjusting this item by using the test tone. Press TEST before starting the foregoing procedure. “TEST DOLBY SUR.” (or “TEST DSP”) appears on the video monitor, and the test tone starts alternating among the speakers. Once you begin this procedure, the test tone remains at the rear center speaker and you can hear how the sound changes as you adjust the various frequency levels. To stop the test tone, press TEST (see pages 39 and 40).

E-55

OPERATION

ADVANCED

English