Yamaha DSP-AZ1 ■6A L, C, R EQ (main L/center/main R equalizer), 6 CINEMA EQ

SET MENU ITEMS

6 CINEMA EQ

Use this feature to match the tonal quality of four groups of speakers: the main and center speaker group, the front effect speakers group, the rear speakers group, and the rear center speaker group. CINEMA-EQ consists of a high-shelving equalizer (HIGH) and a parametric equalizer (PEQ). The high-shelving equalizer changes high frequency characteristics, and the parametric equalizer boosts or cuts any selected frequency. The equalizer can be used for a variety of purposes, such as adjusting the tonal quality of differing types of speakers, adjusting the tonal quality in different installation environments, or adjusting the source sound to your liking.

6 CINEMA EQ

≥L,C,R…………………OFF FRNT EFCT………OFF REAR L/R…………OFF REAR CT……………OFF

1

2

Press / repeatedly to select one of the speaker groups and press +/– to select “ON”.

Press / several times to display the setting screen for the channel to be set.

There are 4 groups (6A – 6D) to be set.

Caution

3

4

•If “OFF” is selected in step 1, the setting screen for that group will not be dis- played.

Press / to select the item to be adjusted.

Select one item at each time from “FRQ”/”GAIN” for “HIGH” and “FRQ”/”GAIN” for “PEQ”.

Adjust the value for the item by pressing +/–.

“FRQ” (frequency) for “HIGH” is to set the turn over frequency and “PEQ” for the band central frequency. The amplification increases for higher “GAIN” value while the attenuation increases for lower “GAIN” value.

Notes

•When any change has been made on the initial setting, * (asterisk) will be placed in front of its parameter name.

•CINEMA-EQ does not work when you press STEREO/EFFECT to turn off the effect.

•While “TEST DOLBY SUR.” or “TEST DSP” is being activated, the test tones are output as described below.

16A L,C,R EQ: The test tones are output from the main L/R and center channels. (When “1A CENTER SP” is set to “NONE”, the test tones are output from the main L/R only.)

26B FRNT EFCT EQ: The test tones are output from the front effect channels.

3 6C REAR L/R EQ: The test tones are output from the rear L/R channels.

4 6D REAR CT EQ: The test tones are output from the rear center channels.

■6A L, C, R EQ (main L/center/main R equalizer)

Use this feature to adjust the tonal quality of the main L/R and center channels.

6A L,C,R EQ	Control range:	1.0 kHz – 12.7 kHz (HIGH: FRQ, PEQ: FRQ),
		–9 dB – +6 dB (HIGH: GAIN, PEQ: GAIN)
≥ HIGH:FRQ…12.7kHz	Initial setting:	12.7 kHz (HIGH: FRQ, PEQ: FRQ), –3 dB (HIGH: GAIN),
GAIN………-3dB		–4 dB (PEQ: GAIN)
PEQ :FRQ…12.7kHz
GAIN………-4dB

E-56