35
This mode contains various settings related to trigger
input from the pads and trigger sensors that are con-
nected to the DTXPRESS.
It allows you to adjust pad sensitivity and assign drum
voices to each trigger input. Trigger Setup data consists
of seven preset types (No. 1-7) and four original setup
types (No. 8-11) for storing user setup data.
■What you can do with the Trigger Setup Edit
Mode
The Trigger Setup Edit Mode lets you alter a variety of settings for
each of the trigger inputs jacks (1-10) of the Trigger Setup.
You can edit both preset (No. 1-7) and user Trigger Setups (No. 8-
11).
The edited Trigger Setup can be stored in a User Trigger Setup
(No. 8-11) using the Store Operation.
*Selecting another Trigger Setup before storing your changes
will result in the data reverting to its default settings.
* Data cannot be stored to preset Trigger Setup (No. 1- 7).
■ Entering the Trigger Setup Edit Mode
Press the [TRIG] button on the front panel.
Once the Trigger Setup Edit Mode is entered, the INPUT
parameter’s main page (pad type), shown below, will be displayed.
5.
Use the [VALUE–], [VALUE+] buttons to set the
parameter’s value or ON/OFF setting.
*Once a setting is changed, “*” will appear on the display next
to “TRIG”. After data is saved, the mark will disappear.
Trigger Setup Edit Mode*Double-click the [TRIG] button to enter the Trigger Setup Edit
Mode. The [1-2. Gain, Minimum Velocity] display will appear.
■ What’s in the Trigger Setup Edit Mode
The Trigger Setup Edit Mode is divided into two sub-groups.
1. INPUT Parameters ...............................mP. 3 6
Contains specific settings for each pad (1-10).
2. COMMON Parameters .........................mP. 3 8
Contains common settings for all pad inputs.
Procedure
1.
Before editing, it is necessary to select the trigger setup
you want to edit in the drum kit play mode [Trigger Setup
& Tempo].
2.
Press the [TRIG] button to enter the Trigger Setup Edit
mode.
3.
Use the [PAGE▲], [PAGE▼] buttons to display the list
you want to edit.
*If the Utility mode’s [Jump to Recent Page] parameter (P. 28)
is set to “on”, the DTXPRESS will display the page last ed-
ited when entering the Trigger Setup Edit mode.
4.
Use the [SEL<], [SEL>] buttons to move the cursor to
the list you want to edit. The list will flash.
* If there is only one list, it is not necessary to move the cursor.
TRIG IN= 1
Type= KP
6.
To store changes in the User Trigger Setup, use the fol-
lowing procedure.
*The changes you made will be lost if another trigger setup is
selected before your changes have been stored.
6-1. Press the [SAVE/ENT] button. The following display will
appear.
6-2. Use the [VALUE–], [VALUE+] buttons to assign the User
Trigger Setup number (8-11) (located next to “To=”) for
storing your changes. The number and setup name will
appear.
6-3. Press the [SAVE/ENT] button, the following display will
appear asking for confirmation before the store opera-
tion is carried out.
6-4. Press the [SAVE/ENT] or [VALUE+] button, the store
operation will be carried out.
*Press the [VALUE–] button to cancel the store opera-
tion.
The following display will appear after the store opera-
tion is completed.
Trigger Setup Edit Mode Function List
Page
1. INPUT Parameters .................................................. 36
1-1. Pad Type.......................................................... 36
1-2. Gain, Minimum Velocity................................... 36
1-3. Velocity Curve ................................................. 37
1-4. Self Rejection, Rejection ................................. 37
1-5. Specific Rejection............................................ 37
1-6. Copy Input ....................................................... 37
2. COMMON Parameters ............................................ 38
2-1. Increment/Decrement...................................... 38
2-2. Input Exchange ............................................... 38
2-3. Trigger Setup Name ........................................ 38