Initial settings (on the SET UP menu)

Common procedure for setting change

4, 5

DISC SKIP

DISC MODE TIME

OPEN/

CLOSE

6

CANCEL

S/F REPEATA-B

RANDOM

PROG

6

 

1

2

3

4

5

 

 

6

7

8

9

0

 

 

+10

ANGLE

 

RETURN

TITLE/INDEX

 

 

TITLE

 

SELECT

 

AUDIO

 

 

MENU

 

 

MULTI SPEED

SUBTITLE

3

2

SET UP

 

SKIP/SEARCH

OFF/ON

ON SCREEN

STOP

STILL/PAUSE

PLAY

 

 

1 Turn on this unit and the TV monitor, and load discs. 2 Press SET UP when this unit is stopped.

* The SET UP menu appears on the monitor screen.

3 Press or to select the preferred SET UP group.

4 Press or to select the preferred item, and then press SELECT.

*The display on the monitor screen changes to the mode for setting change.

*The current selection is indicated by “*” at the head.

5 Press or to change the selection, and then press SELECT.

*Some items require additional steps. (See the respective pages.)

6 When the setting change is finished, press RETURN (or ) once or more to return to the previous display.

7 Repeat steps 3 to 6 for other items.

To return to the previous display

Press RETURN or .

To clear the SET UP menu

Press SET UP.

To restore the factory default settings for all items While holding CANCEL on the remote controller pressed, press and hold on the front panel for more than 5 seconds.

For your reference:

The numeric buttons can also be used for a setting change instead of or . In this case, pressing SELECT is not necessary.

Note

If the SET UP menu is displayed during playback, you may not be able to change settings on some items. To change them, stop this unit.

44