Getting started

Installing batteries in the remote controller

Since the remote controller will be used for many of this unit’s control operations, you should begin by installing the supplied batteries.

1.Turn the remote controller over and slide the battery compartment cover in the direction of the arrow.

2.Insert the batteries (R6, AA, UM-3 type) according to the polarity markings on the inside of the battery compartment.

3.Close the battery compartment cover.

Notes about the remote controller

Battery replacement

If you find that the remote controller must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.

Notes

cUse only AA, R6, UM-3 batteries.

cBe sure the polarities are correct. (See the illustration inside the battery compartment.)

cRemove the batteries if the remote controller is not used for an extended period of time.

cIf batteries leak, dispose of them immediately. Avoid touching the leaked material and contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

English

Remote controller operation range

2

1

3

Remote control sensor

Within apprxoimately 6 m (19.7 feet)

30

 

°

°

30

 

 

Notes

cThe area between the remote controller and the main unit must be clear of large obstacles.

cDo not expose the remote control sensor to strong lighting, in particular, an inverter type fluorescent lamp. Otherwise, the remote controller may not work properly. If necessary,

position the main unit away from direct lighting.

5