DISC SKIP |
| DISC MODE | TIME | OPEN/ |
| CLOSE | |||
CANCEL | S/F | RANDOM | PROG | |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 0 |
+10 | ANGLE |
| RETURN | TITLE/INDEX |
TITLE |
| SELECT |
| AUDIO |
MENU |
|
| MULTI SPEED | SUBTITLE |
SET UP |
| SKIP/SEARCH | OFF/ON | |
ON SCREEN | STOP | STILL/PAUSE | PLAY |
|
Initial settings (on the SET UP menu)
Audio Settings
The items in this group control audio signals output from the AUDIO OUT terminals on the rear of this unit.
Note: The item No. 2 “Dynamic Range Control” and No. 3 “Speaker” are available for China and General models only.
1Digital Output
On this item, you can select the format of digital signal to be output from the OPTICAL and COAXIAL DIGITAL output terminals of this unit for respective formats recorded on DVD discs.
Depending on the format of digital signal, you can make this unit convert the disc’s original format of digital signal into PCM (48 kHz) format for outputting signals, or you can make this unit output no signal from the OPTICAL and COAXIAL DIGITAL output terminals of this unit.
1 When the SET UP group “Audio Settings” is selected, press 
or 
to select “1 Digital Output”, and then press SELECT.
AudioSettingsDVD VCD | Display Aud | |
|
|
|
1 Digital Output
2 Press 
or 
to select the format of digital signal for which you will change the current setting, and then press SELECT.
|
|
|
|
|
|
|
|
| AudioSettings | Digital Output |
|
| |||
|
|
|
| ||||
| 1 | 96kHz LPCM | 48kHz | PCM |
| ||
2 | Dolby Digital | Disc Original |
| ||||
3 | DTS | Disc Original |
| ||||
4 | MPEG | PCM |
| ||||
|
|
|
|
|
|
|
|
3 Press 
or 
to select the preferred mode, and then press SELECT.
AudioSettings | 96kHz LPCM |
1 48kHz PCM
2 OFF
Note
The settings on this item are only applicable when playing back a DVD.
English
59