SETUP MENU
Audio setup menu
Setting the LPCM output
SETUP
GENERAL
AUDIO
SPEAKER
VIDEO
HDMI
DISC
Move : 
1/1
Analog Output
Digital Out
LPCM Output
Night Listening Mode
Return Select : Enter
Set the LPCM output if you have connected this unit to a
Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
•Select [LPCM Output] in [AUDIO] menu.
48KHz
Select this to play back discs recorded at the sampling rate of 48 kHz. All 96 kHz PCM data streams (if available) are converted to the sampling rate of 48 kHz.
96KHz
Setting the analog output
Set the analog output to match the playback capability of this unit.
•Select [Analog Output] in [AUDIO] menu.
Stereo
Select this to change channel output to stereo, which only delivers sound from the two front speakers.
Multi-Channel
Select this when using a
Setting the digital output
Set the digital output according to your optional audio component connections.
•Select [Digital Out] in [AUDIO] menu.
All
Select this if you have connected the digital audio output jack to a
PCM
Select this only if your receiver is not capable of decoding
Off
Select this to turn off the digital output.
Select this to play back discs recorded at the sampling rate of 96 kHz. If the 96 kHz disc is copy protected, the digital output is automatically converted to a sampling rate of 48 kHz.
Setting the night listening mode
In this mode, high volume output is softened and low volume output is brought upward to an audible level. It is useful when you watch your favorite action movie without disturbing others at night.
•Select [Night Listening Mode] in [AUDIO] menu.
On
Select this to level out the volume. This feature is only available for movies with Dolby Digital mode.
Off
Select this when you want to enjoy the full dynamic range of surround sound.
