29
Voice Display, Page 3
You can adjust to "uniform" a specific parameter used in various voice group at one time.
Take Reverb here, for example, you may sometimes want
to change Reverb depth of the entire system equally
when you rehearse in a concert since each concert hall
has its own environmental characteristics, or resonance.
Although you know you can change the Reverb settings
of the entire system at one time even on the EL-900, the
EL-900m lets you do the same operation with various
parameters.
Furthermore, you can select from the several changing
methods: changing the specific parameter values in a
certain registration to the value in another registration at
one time or offsetting a certain amount of value from a
certain parameter in a registration on the basis of the one
in another registration.

● Let's check each section in the Voice Display.

1 2 3 4 5

6

7

1Voice Group
Shows the currently selected voice group.
2Parameter
Shows the current parameter.
3Registration Memory Number
Shows the currently selected Registration Memory
number.
4Voice Name
Shows the voice name currently assigned to the
displayed Voice Group.
5Registration Memory (1 - 16)
The cursor (box) is positioned at the currently
selected Registration Memory number.
You can move the cursor to select another registration
by pressing the Data Control buttons corresponding to
the left/right arrows in REGISTRATION SELECT
section.
Notice that you cannot move the cursor by directly
pressing one of the Registration Memory buttons
between the Upper and Lower keyboards.
6Same Voice
A line under each registration number indicates that
the currently assigned voice to the registration is the
same as the one shown at the top 4.
7Parameter Value
Shows the values of the currently selected parameter
2 to each registration.
Each value corresponds to the ones currently assigned
to each voice group.