31
● Selecting the desired parameter NOTE:
The parameters you can select using this
method are:
• Volume
• Brilliance
• Reverb Depth
• Sustain
1By pressing PARAM and the appropriate panel button simultaneously:
You can directly select the parameter by pressing the panel button of the
desired parameter while holding down the appropriate Data Control buttons
corresponding to PARAM.
2 By pressing PARAM button:
Press the appropriate Data Control buttons corresponding to PARAM and
then release it. Parameter selection dialog box appears. Select the desired
parameter using the appropriate Data Control buttons (left most) and select
[Set] to execute the operation.
Parameter Selection Dialog Box
NOTE:
Pressing the appropriate Data Control
buttons (left most) while holding down
COARSE button selects the parameters in
the same voice group.
2Cursor (< >)
Selects the registration memory number you want to turn on/off or the
number you want to set it as the master.
The registration memory number 6 is currently selected in this case.
3ON/OFF
Pressing “Off” after selecting the appropriate registration turns off (grayed
out) its parameter. Pressing "On" turns on the parameter (solid bar). All
parameters are selected after Power-On Reset operation.
NOTE:
The registration number encircled by the
cursor (positive box) indicates that it acts
as the master. Turning the Registration
Select "switch" on and off to select the
targeted registrations.
There are several unique methods to select the registration memory numbers: