SETTING UP THE SPEAKERS

This unit designed to provide the best sound-field quality with a 5-speaker configuration: front speakers, rear speakers and a center speaker. You may omit the center speaker, if for some reason it is not practical to use a center speaker. (Refer to the “4- Speaker Configuration” shown below.)

The front speakers are used for the main source sound plus the effect sounds. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.).

English

(1)

Front LCenterFront R
DialogueSurround sound
Rear LRear R

(2)

Front L

Front R

Dialogue

Surround sound

Rear L

Rear R

Front R

Center

Front L

TV set

Rear R

Speaker configuration

(1)5-Speaker Configuration

This configuration is the most effective and recommended one. In this configuration, the center speaker is necessary as well as the rear speakers. If the sound field program DOLBY PRO LOGIC or DOLBY 3 STEREO is selected, conversations will be output from the center speaker and the ambience will be excellent.

c Set the center channel mode to the “NORMAL” position. (For details, refer to page 12.)

(2)4-Speaker Configuration

The center speaker is not used in this configuration. If the sound field program DOLBY PRO LOGIC is selected, the center sound is output from the left and the right front speakers, although the program DOLBY 3 STEREO is useless in this configuration. However, the sound effect of other programs can be the same as that of the 5- speaker configuration.

c Be sure to set the center channel mode to the “PHANTOM” position. (For details, refer to page 12.)

Note

Be sure to use two rear speakers. If you connect one rear speaker only, sound will not be output from the rear speaker.

Speaker placement

Front speakers:In normal position.
Rear speakers:

Behind your listening position, facing

 

slightly inward. Nearly 1.8 m (approx.

 

six feet) up from the floor.
Center speaker:

Precisely between the front speakers.

Rear L

E-7