VIDEO CD PLAYER OPERATION

For easier operation
Direct operation

English

Pressing the DISC selector button (1, 2 or 3) will select the disc directly, and playback will begin from track 1 automatically.

Note

If a Video CD, version 2.0 is selected, “PBC” lights up on the display, and the total number of tracks, the total playing time of the disc and the music calendar will not be displayed. In this mode, disc playback is controlled by the rule of Playback Control. (For details of Playback Control, refer to page 22–24.)

To cancel this mode and restore the normal playback mode, press the stop (RETURN) button. “PBC” disappears from the display.

To call the Playback Control mode again, press and hold the stop (RETURN) button for more than 2 seconds.

To interrupt playback1 Press the play/pause / button.* The “ ” indicator will flash.2 Press the play/pause / button to resume playback from the same point.To stop playbackPress the stop button.To switch the unit in the standby mode after use

Turn the unit into the standby mode by pressing the POWER switch. (The indicators will go off except for the current time display.)

 

 

VCD/CD

 

 

 

VCD/CD

 

 

1

2

3

4

5

1

2

3

4

5

1

2

3

4

5

1

2

3

4

5

6

7

8

PRESET

6

7

8

9

0

6

7

8

 

PRESET

A

B

C

D

E

 

 

 

 

 

 

TIME

PROG

 

 

+I0

6

7

8

9

0

MODE

INDEX

OPEN/CLOSE TUNER

 

 

 

 

E

 

 

 

 

 

 

 

 

 

DISC SKIP

PREV

NEXT

RETURN

SELECT

 

 

 

 

+I0

LEVEL

 

 

INPUT

 

 

 

 

 

 

CENTER/REAR

TEST

FLAT

TIME INDEX

 

 

 

 

 

/DELAY ECHO/

 

 

 

 

 

KEY

 

 

 

 

 

 

 

 

 

MUSIC PROGRAM

USER

INTRO

DIGEST

 

 

 

 

 

SLEEP

 

POWER

 

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME

When this unit is in the standby mode, pressing the DISC selector (1, 2 or 3) button will turn the power on and start disc playback automatically.

When the power is on, even if an input source other than Video CD player is selected, pressing a DISC selector button or closing the disc table by pushing the front edge of the disc table gently will start playback directly.

*These ways of playback can also be used to close the disc table. If the table is closed in these ways, playback will begin automatically, however, the display will not show the total number of tracks and the total playing time of the disc to be played back.

PLAYXCHANGE

During playback, you can open the disc table by pressing the DISC CHANGE button without interrupting playback. However, in this state, pressing the DISC SKIP button or a DISC selector button has no effect.

Precautions

•If TV or radio interference occurs during Video CD player operation, move the unit away from the TV or radio.

•Subjecting the unit to shock or vibration can cause mistracking.

•Playing back some discs at high volume can cause mistracking. In this case, listen at lower volume.

•Do not pull open the disc table forcibly with your hands.•Do not push the disc table while it is moving.

•If the power fails while the table is open, wait until the power supply returns or gently push the table manually to close it.

•The temperature range for playing back discs is recommended to be 5°C (41°F) – 35°C (95°F).

Direct-selection playback

By using the track number input buttons on the remote control transmitter, any track you wish to listen to can be played back directly.

Use the track number input buttons to select the desired track number. Playback will begin automatically.

A. For example, to choose selection 5Press the “5” button.B. For example, to choose selection 12 (1)Press the “+10” button.(2)Within 3 seconds, press “2” button.C. For example, to choose selection 20 (1)Press the “+10” button.

(2)Within 3 seconds, press the “+10” button again. (3)Within 3 seconds, press the “0” button.

Note

If you select a track number higher than the number of tracks on the disc, playback will begin from the last track on the disc.

E-15