Yamaha EM-202VCD English, Manual tuning, TUNING OPERATION, Automatic tuning, press the button to tune to a lower frequency, 3 Press and hold the button to tune to a higher

TUNING OPERATION

		2		1		3, 2
				INPUT SELECTOR		VOLUME
			VCR/LD-TV/VCD-CD/TUNER/TAPE•MD/AUX
			OPEN/
VIDEO CD			CLOSE
Version 2.0 / Playback Control
			DISC
			CHANGE
	DISC
1	2	3
				RANDOM REPEAT	TIME	MEMORY	AUTO/MAN'L
		PROGRAM
				HOUR	MIN	TIME ADJ	TIMER
POWER				PRESET/TUNING/BAND		A/B/C/D/E
			MUSIC
		ECHO	ECHO
PHONES					MIC		MIC MIXING
		USER	MEMORY	DISPLAY
							MIN MAX

4, 3

	VCD/CD
1	2	3	4	5
1	2	3	4	5
6	7	8	PRESET
6	7	8	9	0
A	B	C	D	E
TIME	PROG			+I0	1
MODE	INDEX		OPEN/CLOSE TUNER
DISC SKIP	PREV	NEXT	RETURN	SELECT
LEVEL			INPUT
CENTER/REAR	TEST	FLAT	TIME INDEX
/DELAY ECHO/
KEY
MUSIC PROGRAM		USER	INTRO	DIGEST
SLEEP		POWER		DISPLAY

VOLUME

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning).

Automatic tuning

1 Select the tuner by turning the INPUT SELECTOR until “TUNER” appears on the display.

2 Select the reception band (FM or AM) by pressing the PRESET/TUNING/BAND button confirming it on the display.

*Do not select a preset tuning mode (Do not select a mode in which “PRESET” lights up on the display.)

3 Press the AUTO/MAN’L button so that “AUTO” appears on the display.(In this mode, stations are received in stereo or monaural automatically.)4 Press the button to tune to a higher frequency, orpress the button to tune to a lower frequency.(When tuned in to a station, “TUNED” will light up on the display.)

5 If the station where tuning search stopped is not the desired one, follow step 4 again.

*If the tuning search does not stop at the desired station, change to the Manual tuning method as described below.

*STEREO indicator will light up when an FM stereo broadcast with sufficient signal strength is received.

Manual tuning1 Follow steps 1 and 2 of the Automatic tuning method.2 Press the AUTO/MAN’L button so that “AUTO” disappears from the display.(In this mode, stations are received in monaural.)3 Press and hold the button to tune to a higherfrequency, or press and hold the button to tune to a lower frequency.

Release it just before reaching the desired frequency, and then press it repeatedly until the desired frequency appears.

(When tuned in to a station, “TUNED” will light up on the display.)

Note

If you tune in to an FM station manually, it is received in monaural automatically to increase the signal quality.

Note

Pressing the TUNER input selector button on the remote control transmitter switches the tuner from a normal tuning mode to a preset tuning mode and vice versa, or from FM to AM mode and vice versa.

English

E-25