Yamaha EM-202VCD Sleep timer operation, Using the timer and the sleep timer at the same time, POWER, SLEEP, POWER, OFF SLEEP ↑, To change the sleep time

Play the desired sound source.

HOW TO USE THE BUILT-IN TIMER

				INPUT SELECTOR		VOLUME
			VCR/LD-TV/VCD-CD/TUNER/TAPE•MD/AUX
			OPEN/
VIDEO CD			CLOSE
Version 2.0 / Playback Control
			DISC
			CHANGE
	DISC
1	2	3
				RANDOM REPEAT	TIME	MEMORY	AUTO/MAN'L
		PROGRAM
				HOUR	MIN	TIME ADJ	TIMER
POWER				PRESET/TUNING/BAND		A/B/C/D/E
			MUSIC
		ECHO	ECHO
PHONES					MIC		MIC MIXING
		USER	MEMORY	DISPLAY
							MIN MAX

POWER

	VCD/CD
1	2	3	4	5
1	2	3	4	5
6	7	8	PRESET
6	7	8	9	0
A	B	C	D	E
TIME	PROG			+I0
MODE	INDEX		OPEN/CLOSE TUNER
DISC SKIP	PREV	NEXT	RETURN	SELECT
LEVEL			INPUT
CENTER/REAR	TEST	FLAT	TIME INDEX
/DELAY ECHO/
KEY
MUSIC PROGRAM		USER	INTRO	DIGEST
SLEEP		POWER		DISPLAY
SLEEP		VOLUME

POWER

Sleep timer operationThis unit can be turned into the standby mode automatically.

1

2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “2h00m”.

3 Press the SLEEP button repeatedly until the desired sleep time appears on the display.

The display will change as described below. [Time is displayed by the hour (h) and the minute (m).]

2h00m	↑	1h30m ↑ 1h00m		↑	0h30m
↑			OFF SLEEP ↑
		(Sleep timer is off.)

*The original display mode will resume about 4 seconds after the selection is made.

*The SLEEP indicator will light up to indicate that the sleep timer is on.

4 The unit will be turned into the standby mode automatically when the selected sleep time passes.

To confirm the sleep time setting

Press the SLEEP button once. “SLEEP” appears on the display, and soon it is replaced by the remaining time of the selected sleep time.

To change the sleep time

While the SLEEP indicator is illuminated, press the SLEEP button repeatedly until the desired time appears.

To stop the sleep timer operation

Press the POWER switch, or press the SLEEP button repeatedly until “OFF SLEEP” appears on the display. (The SLEEP indicator will go out.)

Using the timer and the sleep timer at the same time1 Prepare timer play. (See page 38 and 39.)

*Do not turn this unit into the standby mode after the timer setting is finished.

2 Press the SLEEP button and set the sleep time.

When the sleep timer operation finishes, the timer begins functioning to turn the source on at the preset time.

Note

Do not make the timer time setting so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.)

E-40