REMOTE CONTROL TRANSMITTERNames of control buttons

(See figure 3 on page 5 at the beginning part of this manual.)

■Amplifier/tuner control buttons

1Remote Control Transmitter Window

2Preset Station Number Buttons

3A, B, C, D, E Selector Buttons

4TEST Button

5CENTER/REAR/DELAY Selector Button

6LEVEL Control Buttons

7SLEEP Button

8STANDBY/ON Switch

9VOLUME – (Down)/+ (Up) Buttons

0DISPLAY Button

AMUSIC Button

BUSER Button

CPROGRAM Button

DFLAT Button

EINPUT Selector Buttons

FTUNER Input Selector Button

GPRESET Number (Down)/ (Up) Buttons

■CD player control buttons

HTrack Number Input Buttons

ITIME Button

JPROGRAM Button

KDisc Play MODE Selector Button

LDISC SKIP Button

MREPEAT Button

NSkip Buttons: /

(Search Buttons: / )

ORANDOM Button

PSTOP Button:

QPLAY/PAUSE Button:

ROPEN/CLOSE Button:

Loading the batteries for the remote control transmitter

(See figure 4 on page 5.)

1 Remove the battery compartment cover. (Slide the cover in the direction of the arrow.)

2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment.

* Installing the batteries improperly may cause failure.

3 Replace the battery compartment cover.

Precautions for battery use

•Insert the batteries according to the direction indicated in the battery compartment.

•Replace all batteries with new ones at the same time.

•Remove the batteries if they are weak or the unit is not in use for long periods.

•Don’t mix normal batteries with rechargeable batteries.

Proper use of the remote control transmitter

(See figure 5 on page 5.)

Aim (within the range of 60° with no obstacles) the remote control transmitter at the remote control sensor and operate as shown.

Notes concerning use

•Replace the batteries if control distance decreases or operation becomes unstable.

•Periodically clean the transmitter window on the remote control transmitter and the sensor on the main unit with a soft cloth.

•Exposing the sensor on the main unit to strong light (especially an inverter type of fluorescent lamp etc.) may interfere with operation. In this case, reposition the main unit to avoid direct lighting.

•Keep the remote control transmitter away from moisture, excessive heat, shock and vibrations.

•The remote control transmitter’s usable range is within 0.2m (8”) and 6m (20’) away from the sensor.

E-6