HOW TO USE THE
HOUR MIN
|
|
|
| INPUT SELECTOR |
| VOLUME | |
|
|
|
|
|
|
| |
CD CHANGER RECEIVER |
|
|
|
|
|
|
|
|
|
| OPEN/ |
|
|
|
|
|
|
| CLOSE |
|
|
|
|
|
|
| DISC |
|
|
|
|
|
|
| CHANGE |
|
|
|
|
| DISC |
|
|
|
|
|
|
1 | 2 | 3 |
|
|
|
|
|
|
|
|
| RANDOM REPEAT | TIME | MEMORY | AUTO/MAN'L |
|
| PROGRAM |
|
|
|
|
|
|
|
|
| HOUR | MIN | TIME ADJ | TIMER |
STANDBY/ON |
|
|
| PRESET/TUNING/BAND | A/B/C/D/E |
| |
|
|
| MUSIC |
|
|
|
|
PHONES |
|
|
|
| MIC |
| MIC MIXING |
|
| USER | MEMORY | DISPLAY |
|
|
|
|
|
|
|
|
|
| MIN MAX |
STANDBY/ON | DISPLAY TIMER |
|
| CD |
|
|
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | PRESET | |
6 | 7 | 8 | 9 | 0 |
A | B | C | D | E |
TIME | PROG |
|
| +I0 |
MODE | REPEAT | RANDOM | OPEN/CLOSE | TUNER |
DISC SKIP |
|
| STOP | PLAY/PAUSE |
|
|
| INPUT |
|
CENTER/REAR | TEST | FLAT |
|
|
/DELAY |
|
| ||
LEVEL 
MUSIC PROGRAM USER
STANDBY/ON
SLEEPDISPLAY
VOLUME 
DISPLAY
STANDBY/ON
➂ON TIME/time setting mode
[“ON TIME” appears on the display, and soon it is changed to a time setting mode.]
Set to the time when you want to begin the timer play by using the HOUR button and the MIN button.
➃OFF TIME/time setting mode
[“OFF TIME” appears on the display, and soon it is changed to a time setting mode.]
If necessary, set to the time when you want to finish the timer play (to turn this unit into the standby mode) by using the HOUR button and the MIN button. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour.
Note
The TIMER button functions also in the time (ON TIME or OFF TIME) setting mode. (However, it also turns this unit into the standby mode.)
3 Press the TIMER button to complete the timer play setting. (This unit turns into the standby mode.) If you will still use this unit, press the STANDBY/ON switch to turn on this unit.
Note
If you continue using this unit after a timer play setting is made, the source set for the timer play will begin playing when the time comes in place of the source played at that time.
To cancel the timer play setting
After the timer play is finished (while the current time is displayed), press the TIMER button so that “TIMER” goes out from the display.
If it is not canceled, this unit will turn on at the same time every day, so it can be used as an alarm.
*Unless the AC supply lead is unplugged or there is a power failure for more than 5 minutes, the time set on the timer will be retained until it is reset.
How to make time setting in the ON TIME or OFF TIME mode
For the hour:
Press the HOUR button to change the hour to a higher value. Press and hold to change continuously.
For the minute:
Use the MIN button and operate it in the same way as you did to change the hour.
Note
You can also change the hour (or the minute) to a lower value by pressing the HOUR button (or the MIN button) with the TIME ADJ button pressed and held.