2 1 1
|
|
|
| INPUT SELECTOR |
| VOLUME | |
|
|
|
|
|
|
| |
CD CHANGER RECEIVER |
|
|
|
|
|
|
|
|
|
| OPEN/ |
|
|
|
|
|
|
| CLOSE |
|
|
|
|
|
|
| DISC |
|
|
|
|
|
|
| CHANGE |
|
|
|
|
| DISC |
|
|
|
|
|
|
1 | 2 | 3 |
|
|
|
|
|
|
|
|
| RANDOM REPEAT | TIME | MEMORY | AUTO/MAN'L |
|
| PROGRAM |
|
|
|
|
|
|
|
|
| HOUR | MIN | TIME ADJ | TIMER |
STANDBY/ON |
|
|
| PRESET/TUNING/BAND | A/B/C/D/E |
| |
|
|
| MUSIC |
|
|
|
|
PHONES |
|
|
|
| MIC |
| MIC MIXING |
|
| USER | MEMORY | DISPLAY |
|
|
|
MIN MAX
USER | 4, 2 3, 5 |
1 2 |
|
3 4 |
|
|
| CD |
|
|
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | PRESET | |
6 | 7 | 8 | 9 | 0 |
A | B | C | D | E |
TIME | PROG |
|
| +I0 |
MODE | REPEAT | RANDOM | OPEN/CLOSE | TUNER |
DISC SKIP |
|
| STOP | PLAY/PAUSE |
|
|
| INPUT | 2 |
1 | CENTER/REAR | TEST | FLAT |
| /DELAY |
LEVEL | MUSIC PROGRAM | USER | 4, 2 |
SLEEP | STANDBY/ON | DISPLAY |
VOLUME
Your favorite pair of any equalizer mode (or an equalizer pattern of your own adjusting) and any sound field program can be stored as a user program. Up to 4 pairs can be stored as desired.
To store
1 Select a desired equalizer mode by pressing the MUSIC button.
*If desired, adjust the equalizer as you prefer by using the equalizer control buttons.
2
3 Press the user program MEMORY button.
*“1” will flash on the user program number indicator and the MEMORY indicator will flash for about 5 seconds.
4 Select the user program number (1, 2, 3 or 4) to which you will store the selected modes by pressing the USER button once or more before “1” stops flashing.
*Whenever you press the USER button, the user program number changes and is displayed as follows.
USER 1 | USER 2 | US |
USER 4
5 Press the user program MEMORY button before the number selected in step 4 stops flashing.
*In the same way, store other pairs to other three user positions.
*It is also a good idea to store only an equalizer pattern of your own adjusting (without storing any sound field program).
Notes
•A new program can be stored in place of the former one.
•In step 4 or 5, if the user program number indicator stops flashing before operation, return to step 3.
To recall a user program
1 Play back a source. (For source playback, refer to pages 16 to 30)
2 Press the USER button once or more so that the user program number you want to recall lights up.
*Whenever you press the USER button, the user program number changes and is displayed as follows.
USER 1 USER 2 USER 3
OFF
English