Yamaha EMX120CD (See figure 3 on page 5 at the beginning part of this manual.), 1 Remote Control Transmitter Window, I Track Number Input Buttons, J TIME Button, (ECHO Button)

REMOTE CONTROL TRANSMITTERNames of control buttons

(See figure 3 on page 5 at the beginning part of this manual.)

■ Amplifier/tuner control buttons	■ CD player control buttons
1 Remote Control Transmitter Window	I Track Number Input Buttons
2 Preset Station Number Buttons	J TIME Button
3 A, B, C, D, E Selector Buttons	K PROGRAM Button
4 TUNER Input Selector Button	L Disc Play MODE Selector Button
5 CD Input Selector Button	M DISC SKIP Button
6 CENTER/REAR/DELAY Selector Button	N Skip Buttons:	/
(ECHO Button)	(Search Buttons:	/ )
7 TEST Button	O REPEAT Button
8 LEVEL Control Buttons	P STOP Button:
9 SLEEP Button	Q PLAY/PAUSE Button:
0 KARAOKE Button	R OPEN/CLOSE Button:
A PRESET Number (Down)/ (Up) Buttons	S RANDOM Button
B INPUT Selector Buttons
C FLAT Button
D MUSIC Button
E PROGRAM Button
F STANDBY/ON Switch
G DISPLAY Button
H VOLUME – (Down)/+ (Up) Buttons

Loading the batteries for the remote control transmitter

(See figure 4 on page 5.)

1 Remove the battery compartment cover. (Slide the cover in the direction of the arrow.)

2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment.

* Installing the batteries improperly may cause failure.

3 Replace the battery compartment cover.

Precautions for battery use

•Insert the batteries according to the direction indicated in the battery compartment.

•Replace all batteries with new ones at the same time.

•Remove the batteries if they are weak or the unit is not in use for long periods.

•Do not mix normal batteries with rechargeable batteries.

Proper use of the remote control transmitter

(See figure 5 on page 5.)

Aim (within the range of 60° with no obstacles) the remote control transmitter at the remote control sensor and operate as shown.

Notes concerning use

•Replace the batteries if control distance decreases or operation becomes unstable.

•Periodically clean the transmitter window on the remote control transmitter and the sensor on the main unit with a soft cloth.

•Exposing the sensor on the main unit to strong light (especially an inverter type of fluorescent lamp etc.) may interfere with operation. In this case, reposition the main unit to avoid direct lighting.

•Keep the remote control transmitter away from moisture, excessive heat, shock and vibrations.

•The remote control transmitter’s usable range is within 0.2m (8”) and 6m (20’) away from the sensor.

E-6