Manuals / Brands / Home Audio / CD Player / Yamaha / Home Audio / CD Player

Yamaha EMX120CD Adjusting brightness of the display, Adjusting input level of sources respectively, value: ±0), Control range, (Selectable value: 0 dB, –3dB, –6dB, –9dB)

1 53

Download 53 pages, 1.12 Mb

ADJUSTMENTS

1

DISPLAY

VOLUME

2

DISPLAY

INPUT SELECTOR

Adjusting brightness of the display	English

If desired, you can adjust brightness of the display.

1 Press and hold the DISPLAY button for more than 2 seconds so that “DIMMER±0” appears on the display.

2 Holding the DISPLAY button pressed, turn the VOLUME control clockwise to increase or counterclockwise to decrease brightness.

This adjustment can be made even though this unit is in the standby mode.Control rangeWhen the power is on: ±0 to –6 (Preset value: ±0)When this unit is in the standby mode : +3 to –3 (Presetvalue: ±0)

Adjusting input level of sources respectively

1

CD TUNER

VCR•LD/TV•CD•TAPE/MD•TUNER

2	INPUT TRIM

3

VOLUME

INPUT TRIM

You can adjust input level of sources (the built-in CD player, tuner and external units connected to this unit, for example tape deck and video cassette recorder).

(Selectable value: 0 dB, –3 dB, –6 dB, –9 dB)

1 Select a source whose input level you will adjust by using the INPUT SELECTOR buttons, and then play back the source. (For source playback, refer to pages 18 to 29.)

2 Press and hold the INPUT TRIM button for more than 2 seconds so that “TRIM” and the currently selected value appear on the display.

3 While holding the INPUT TRIM button down, change the value by turning the VOLUME control.

4 When you finish the adjustment, release the INPUT TRIM button.(The selected value is memorized by this operation.)5 In the same way, adjust input level of other sources.

E-15

Contents

Page SUPPLIED ACCESSORIES ACCESORIOS INCLUIDOS KHz MHz 90 A B C D E F G H I J K L M N OP Q R S T U V W MN O P Q 0.2 m – 6 m (8” – 20’) Center speaker Altavoz central Rear speakers Altavoces traseros Front speakers White line Linea blanca (General model) (Modelo General) LD player etc Monitor TV Tocadiscos de discos láser, etc Monitor de TV Tape deck, MD recorder, etc INTRODUCTION CONTENTS Page PRECAUTIONS OPERATING EXTERNAL UNITS PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT ■Do not operate this unit upside-down.It may overheat, possibly causing damage ■Never open the cabinet. If something drops into the set, contact your dealer To eliminate condensation: •CD pickup IMPORTANT WARNING NOTE CAUTION FOR CARRYING THIS UNIT CAUTION FOR MOVING THIS UNIT FEATURES General c5-SpeakerConfiguration Front L, R: 100W + 100W (6Ω ) RMS Output Power, 10% THD, 1 kHz (See figure 1 on page 3 at the beginning part of this manual.) 1Preset Equalizer Mode Indicator (MUSIC) 2Sound Field Program Indicator (PROGRAM) 3Karaoke Mode Indicator (KARAOKE) 4Center Channel Mode (NOR/PHANTOM) Indicator (See figure 3 on page 5 at the beginning part of this manual.) 1 Remote Control Transmitter Window I Track Number Input Buttons 2 Preset Station Number Buttons J TIME Button Speaker configuration Speaker placement Good No good Only for customers who use the YAMAHA NS-P30speaker system (separate purchase) “NS-P30” ■Mounting the rear speakers (NX-E70) To hang in a side long way WARNING: ■Mounting the center speaker (NX-C70) Connecting speakers (See figure 6 on page 6.) (See figure 7 on page 7.) (1) (2) 15 m (49 feet) (4) (3) Connecting external components (See figure 8 on page 8.) Turning this unit on or into the standby mode Volume control Listening with headphones Setting the clock Adjusting brightness of the display Adjusting input level of sources respectively (L and R) Press the VOLUME + (up) button to increase the volume Speaker balance adjustment Before operation NORMAL (For 5-speaker configuration): Page Press the OPEN/CLOSE button to open the disc table COMPACT DISC PLAYER OPERATION DISC selector buttons STANDBY/ON1 7, 1 CD playback Direct-selectionplayback A. For example, to choose selection Press the “5” button B. For example, to choose selection (1)Press the “+10” button To play back a desired track on the disc (Skip search) The beginning of any track can be found automatically 1 Select a disc and begin playback 2 Press the button to advance or button to reverse through the disc Press once for each track to be advanced or reversed Program play You can program up to 20 tracks in any desired order 1 Load discs and close the disc table 2 When in the stop mode, press the PROG button to prepare for programming “PROG” and To stop program play •Press the stop button. The first programmed track number will be displayed To resume playback, press the play/pause To cancel a programmed sequence There are several methods as described below Random play To cancel the random play (off) S REP F REP Repeat play Repeat play modes SINGLE REPEAT (S REP) FULL REPEAT (F REP) When the unit is in the all disc play mode: Switching the time display [Example] TUNING OPERATION Automatic tuning 3 Press the AUTO/MAN’L button so that “AUTO” lights up on the display (In this mode, stations are received in stereo or monaural automatically.) 4 Press the button to tune to a higher frequency, or Manual preset tuning To store stations (Example: To store a station to A1) 2 Press the tuner MEMORY button *“MEMORY” and “PRESET” will flash on the display for about 5 seconds Automatic preset tuning When the automatic preset tuning is completed; To listen to or watch a source on an external unit connected with this unit To record a source to tape USING GRAPHIC EQUALIZER PROGRAM 100 1K 10K Preset graphic equalizer modes (MUSIC) Mode Adjusting the graphic equalizer for your desired sound taste Turning the equalizer to “flat” (the state with no equalization applied) Storing your own equalizer patterns USING SOUND FIELD PROCESSOR Listening to the music with a sound field effect PRO LOGIC 3 STEREO HAL OFFARENA MONO MOVIE STADIUM DISCO Adjusting CENTER LEVEL Adjusting REAR LEVEL Adjusting DELAY TIME turning the MIC TONE control * Turning the MIC TONE control clockwise makes tonal quality softer To cancel the karaoke mode the next page.) KARAOKE OPERATION Singing karaoke 1 Connect one or two microphones to the MIC jack(s) on the front panel LR L R VOCAL CUT (off) For descriptions of the karaoke modes, see the list below Adjusting the level of echo effect Control range: On the front panel: On the remote control transmitter: To record: 2 Prepare to sing Karaoke by using microphone(s) 6 Begin singing Karaoke With this recording method, the effect of the HOW TO USE THE BUILT-INTIMER Timer play 1 Prepare the source to be played For tuner: Tune in to the station you will listen to ➂ ON TIME/time setting mode STANDBY/ON HOUR MIN DISPLAY TIME ADJ ➃OFF TIME/time setting mode To cancel the timer play setting Sleep timer operation This unit can be turned into the standby mode automatically 3 Press the SLEEP button repeatedly until the desired sleep OFF SLEEP ↑ *The SLEEP indicator will light up to indicate that the sleep timer is on TROUBLESHOOTING SYMPTOM CAUSE REMEDY CARE OF COMPACT DISCS mark this surface Keep your discs away from direct sunlight, heat and excessive moisture Always hold the CDs by the edges. Fingerprints, dirt or