Yamaha EMX120CD Note, Note, Note, TIMER, DISPLAY, STANDBY/ON, For the hour:, For the minute:, DISPLAY TIME ADJ, STANDBY/ON HOUR MIN, ➂ ON TIME/time setting mode

HOW TO USE THE BUILT-IN TIMER

➂ ON TIME/time setting mode

English

STANDBY/ON HOUR MIN

CD CHANGER RECEIVER EMX–120CD								A/B/C/D/E	PRESET/TUNING/BAND
						OPEN/CLOSE	DISC
							CHANGE
						DISC 1	DISC 2	DISC 3
PROGRAM						INPUT SELECTOR		VOLUME
						CD	TUNER
STANDBY/ON
ECHO	MUSIC	ECHO
						VCR•LD/TV•CD•TAPE/MD•TUNER
KARAOKE		MEMORY
PHONES						MIC TONE		MIC	MIC MIXING
		DISPLAY	MEMORY AUTO/MAN’L	REPEAT	TIME	INPUT TRIM

DISPLAY TIME ADJ TIMER

	CD	TUNER
1	2	3	4	5
1	2	3	4	5
6	7	8	PRESET
6	7	8	9	0
A	B	C	D	E
TIME	PROG			+I0
MODE		REPEAT	RANDOM	OPEN/CLOSE
DISC SKIP			STOP	PLAY/PAUSE
CD	TUNER		INPUT
CENTER/REAR	TEST	FLAT
/DELAY
ECHO LEVEL		KARAOKE	MUSIC	PROGRAM

STANDBY/ON

SLEEPDISPLAY

[“ON TIME” appears on the display, and soon it is changed to a time setting mode.]

Set to the time when you want to begin the timer play by using the HOUR button and the MIN button.

➃OFF TIME/time setting mode

[“OFF TIME” appears on the display, and soon it is changed to a time setting mode.]

If necessary, set to the time when you want to finish the timer play (to turn this unit into the standby mode) by using the HOUR button and the MIN button. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour.

Note

The TIMER button functions also in the time (ON TIME or OFF TIME) setting mode. (However, it also turns this unit into the standby mode.)

3 Press the TIMER button to complete the timer play setting. (This unit turns into the standby mode.) If you will still use this unit, press the STANDBY/ON switch to turn on this unit.

Note

If you continue using this unit after a timer play setting is made, the source set for the timer play will begin playing when the time comes in place of the source played at that time.

To cancel the timer play setting

After the timer play is finished (while the current time is displayed), press the TIMER button so that “TIMER” goes out from the display.

If you do not cancel the timer play setting, this unit will turn on at the same time every day, so it can be used as an alarm.

*Unless the AC supply lead is unplugged or there is a power failure for more than 5 minutes, the time set on the timer will be retained until it is reset.

VOLUME

STANDBY/ON

DISPLAY

How to make time setting in the ON TIME or OFF TIME modeFor the hour:

Press the HOUR button to change the hour to a higher value. Press and hold to change continuously.

For the minute:

Use the MIN button and operate it in the same way as you do to change the hour.

Note

You can also change the hour (or the minute) to a lower value by pressing the HOUR button (or the MIN button) with the TIME ADJ button pressed and held.

E-41