Input specifications 31

EMX5000-20/EMX5000-12—Owner’s Manual
■Input specifications■Output specifications

For European Model

Purchaser/User Information specified in EN55103-1 and EN55103-2.

Inrush Current: 70A

Conformed Environment: E1, E2, E3 and E4

Dimensions (WxHxD) 682 × 158 × 538 mm (EMX5000-20) / 478 × 158 × 538 mm (EMX5000-12)
Weight 19 kg (EMX5000-20) / 15 kg (EMX5000-12)
Accessories Power cord, Owner’s Manual
Input terminals Gain
control
Actual load
impedance
For use with
nominal
Input level Connectors on
mixer
Sensitivity1
1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain.
(All fader and level controls are at maximum position.)
Nominal Max. before clip
CH INPUT A
(CH1–8/1–16)
–60 5 kΩ50–600Ω Mics –80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV) XLR-3-31 type2
2. Balanced. (T=HOT, R=COLD, S=GND)
–16 –36 dB (12.3 mV) –16 dB (123 mV) +4 dB (1.23 V)
CH INPUT B
(CH1–8/1–16)
–60 50 kΩ
600Ω Lines
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV) PHONE JACK
(TRS)2
–16 –36 dB (12.3 mV) –16 dB (123 mV) +4 dB (1.23 V)
ST INPUT
(CH9–12/17–20)
–34
10 kΩ
–54 dB (1.55 mV) –34 dB (15.5 mV) –14 dB (155 mV)
PHONE JACK3
3. Unbalanced.
In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced to 1 Vrms.
+10 –10 dB (245 mV) +10 dB (2.45 V) +30 dB (24.5 V)
ST SUB IN (1, 2) –12 dB (195 mV) +4 dB (1.23 V) +20 dB (7.75 V)
2TR IN (L, R) –26 dBV (50.1 mV) –10 dBV (316 mV) +10 dBV (3.16 V) PHONO JACK3
INSERT IN (CH1–8/1–16) –20 dB (77.5 mV) 0 dB (0.775 V) +20 dB (7.75 V) PHONE JACK3
POWER AMP IN (A, B) –12 dB (195 mV) +4 dBV (1.23 V) +18 dB (6.16 V) PHONE JACK3
Output terminals Actual source
impedance
For use with
nominal
Output level
Connectors on mixer
Nominal Max. before cliping
ST OUT (L/R)
150Ω600Ω Lines +4 dB (1.23 V) +20 dB (7.75 V) PHONE JACK1
1. Unbalanced.
ST SUB OUT (L/R)
MONO OUT
AUX SEND 1, 2
EFFECT SEND 1, 2
REC OUT (L/R) 600Ω10 kΩ Lines –10 dBV (316 mV) +10 dBV (3.16 V) PHONO JACK1
INSERT OUT (CH1–8/1–16) 0 dB (775 mV) +20 dB (7.75 V) PHONE JACK1
PHONES (L/R) 100Ω40Ω Lines 3 mW 75 mW PHONE JACK (TRS)2
2. Impedance balaned. (T=HOT, R=COLD, S=GND)
• In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced 1 Vrms.
SPEAKERS 1 (A, B) 0.1Ω4/8Ω Speakers 100 W/4Ω500 W/4ΩSPEAKON
SPEAKERS 2 (A, B) PHONE JACK1