Yamaha EMX5000-12, EMX5000-20 Digital effect section

Control panel 13

EMX5000-20/EMX5000-12—Owner’s Manual

■Digital effect section

This section enables you to turn the built-in two-

channel digital effects on/off and select the effect

type.

OPROGRAM selector

This knob selects the effect type for the internal

digital effect.

PPARAMETER control

This knob adjusts the time parameter of the

internal digital effect.

QAUX 1/2 control

This knob adjusts the level of the return signal

that is sent from the built-in digital effect to the

AUX 1/2 buses.

RTAP switch, indicator

Only if the PROGRAM selector has selected

TAP DELAY as the internal effect type, you can

press this switch to set the desired delay time.

Press the TAP switch several times, and the inter-

val between the last two presses will be set as the

delay time. The speciﬁed time will be remem-

bered even if the power is turned off.

The LED beside the switch will blink in synchro-

nization with the delay time only when the effect

type is TAP DELAY.

SEFFECT 1/2 ON switch

This switch turns the internal digital effect on/

off.

TPFL (Pre-fader listen) switch

When this switch is on, the signal from before the

EFFECT 1/2 RTN faders U will be sent to the

PHONES jack (input/output panel D).

UEFFECT 1/2 RTN fader

This fader adjusts the level of the return signal

that is sent from the built-in digital effect to the

STEREO bus.