Control function operation

EJU31024

Watercraft control functions

EJU31152

Engine stop switch “ ”

The engine stop switch (red button) stops the engine when the switch is pushed.

1Engine stop switch

EJU31163

Engine shut-off switch “ ”

The engine shut-off switch automatically stops the engine when the clip, on the end of the engine shut-off cord (lanyard), is removed from the switch, such as if the operator falls off the watercraft.

Insert the clip under the engine shut-off switch before starting the engine.

1Clip

2Engine shut-off switch

3Engine shut-off cord (lanyard)

When the engine is not running, remove the clip from the engine shut-off switch to prevent

accidental starting or unauthorized operation by children or others.

EJU41050

Start switch “ ”

ECJ01360

NOTICE

Do not run the engine for more than 15 seconds on land without supplying water, otherwise the engine could overheat.

The start switch (green button) starts the engine when the switch is pushed.

Release the start switch as soon as the engine starts to run. If the engine does not start in 5 seconds, release the start switch, wait 15 seconds, and then try again. NOTICE: Never push the start switch while the engine is running. Do not operate the start switch for more than 5 seconds, otherwise the battery will be discharged and the engine

23