Control function operation

Select the fuel cock knob position from the following three positions according to the circumstances of use.

EJU31202

Choke knob “ ”

The choke knob can be operated to supply a richer air-fuel mixture that is required to start a cold engine.

To use the choke:

Pull the choke knob out.

Push the choke knob in to stop using the choke after the engine starts.

1Fuel cock knob

OFF:

With the fuel cock knob in this position, fuel does not flow to the carburetors. Always turn the fuel cock knob to this position when the engine is not running.

ON:

With the fuel cock knob in this position, fuel flows to the carburetors. Turn the fuel cock knob to this position when starting the engine and operating the watercraft.

RES:

With the fuel cock knob in this position, the fuel reserve is made available. Turn the fuel cock knob to this position if you run out of fuel while operating the watercraft. When this oc- curs, refuel as soon as possible and be sure to turn the fuel cock knob back to “ON”.

1Choke knob

EJU31222

Cooling water pilot outlet

When the engine is running, some of the cooling water that is circulated in the engine is discharged from the cooling water pilot outlet.

1Cooling water pilot outlet

There is a cooling water pilot outlet on the port (left) side of the watercraft. To check for proper operation of the cooling system, make sure that water is being discharged from the cooling water pilot outlet. If water is not being discharged from the outlet, stop the engine and

25