Control function operation
will not start. Also, the starter motor could | is changed, and the direction of the watercraft |
be damaged. [ECJ01040] | is changed accordingly. |
1Start switch
The engine will not start when the clip is removed from the engine
EJU31211
Throttle leverThe throttle lever increases the engine speed when the lever is squeezed.
1Throttle lever
The throttle lever returns automatically to its fully closed (idle) position when released.
EJU35931
Steering systemBy turning the handlebars in the direction you wish to travel, the angle of the jet thrust nozzle
1Handlebar
2Jet thrust nozzle
Since the strength of the jet thrust determines the speed and degree of a turn, throttle must always be applied when attempting a turn, except at trolling speed.
The angle of the jet thrust nozzle can be adjusted to suit operator preference. (See page 61 for adjustment procedures.)
EJU31272
Steering poleThe steering pole can be moved up or down to change the height of the handlebars.
EJU31123
Fuel cock knobThe fuel supply method can be switched by operating the fuel cock knob.
24