Maintenance

(3) Remove the steering cable pivot bolt.

TIP:

 

The outermost hole in the steering column

 

cannot be used.

1Steering cable pivot bolt

2Steering column

(4)Select the nozzle angle, install the steer- ing cable pivot bolt with the lock washer in the desired position (P1 or P2) on the steering column, and then tighten the bolt to the specified torque.

1Nozzle angles

1Nozzle angles

2Steering cable pivot bolt positions

Standard steering cable pivot bolt posi- tion:

P2 Tightening torque:

Steering cable pivot bolt:

5.4Nm (0.55 kgf-m, 4.0 ft-lb)

(5)Securely connect the steering cable joint to the steering cable pivot bolt.

(6)Securely install the steering pole cover and two bolts in their original positions.

62