STORAGE
1ENGINE PREPARATION
With the key removed and the spark plug lead disconnected, turn the clutch by hand until compression is
2 felt. This puts the valves in the closed position.
3 | CHASSIS | ||
| PREPARATION | ||
4 | 1. | Increase the front tire pressure to | |
|
| 23 psi (160 kPa, 1.6 kgf/cm2) and | |
|
| increase the rear tire pressure to | |
5 |
| 31 psi (217 kPa, 2.2 kgf/cm2). | |
2. | Clean exterior of the utility car and | ||
| |||
|
| apply a rust inhibitor. | |
6 | 3. | Cover the utility car with a breath- | |
|
| able cover and store it in a dry, | |
|
|
BATTERY
PREPARATION
1.Remove the battery from the utility car and store it in a cool, dry place that stays between 32˚F (0˚C) and 90˚F (30˚C).
2.Have the battery recharged every
NOTE:
Batteries like the one supplied with your car normally do not require you to check the water level inside the bat- tery for the one year warranty period provided by the manufacturer.
7
8
9
10
11
UTILITY |