PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT
English
Please record the serial number of this unit in the space below.
Serial No.:
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.
WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION (FOR CANADA MODEL)TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMERTHIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws.
The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.
CAUTION FOR CARRYING THIS UNITBe sure not to carry or tip this unit with discs remaining in it.
CAUTION FOR MOVING THIS UNITBefore moving this unit, first remove all discs from the disc table and close the table by pressing the OPEN/CLOSE button. After you confirm that “NO DISC” lights up on the display, switch off the power by pressing the POWER switch, and then disconnect the power plug from the AC outlet.
Invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this unit is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
DANGER: The use of optical instrument with this product will increase eye hazard.
Laser Diode Properties•Material: GaAlAs
•Wavelength: 780nm
•Emission Duration: continuous
•Laser Output: max. 44.6µW*
*This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical