HOW TO USE THE
MINI COMPONENT SYSTEM | DISC CHANGE |
|
OPEN/CLOSE
| Sleep timer operation | English |
|
This unit can be turned off automatically.
1 Play the desired sound source.
2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “2h00m”.
3 Press the SLEEP button repeatedly until the desired sleep
1
2
DISC
PROGRAM
3
PS/PTY/RT/CT
FREQ
RANDOM
PRESET/TUNING/BAND | A/B/C/D/E |
|
SEEK |
| DISPLAY |
PTY |
| |
| START |
|
MODE | EDIT |
|
REPEAT |
|
|
VOLUME
time appears on the display. The display will change as described below. [Time is displayed by the hour (h) and the minute (m).]
USER
POWER
MUSIC
PHONES
| CD |
| |
|
| DOWN | |
INPUT | INPUT |
| |
DOWN |
| UP | |
MEMORY |
|
| |
TAPE 1/2 |
| ||
REC/PAUSE | NORMAL | ||
MODE |
| ||
DOLBY NR |
| HIGH | |
TIMER REC | DUBBING | ||
MEMORY | |||
AUTO/MAN’L |
| ||
TIMER |
| TIME ADJ | |
HOUR |
| MIN | |
PLAYBACK 1 2 REC/PLAYBACK
UP
Active Servo
Technology
2h00m | ↑ | 1h30m | ↑ 1h00m | ↑ | 0h30m | ||||
↑ |
|
| OFF SLEEP ↑ |
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
| (Sleep timer is off.) |
|
|
| |||
*The original display mode will resume about 4 seconds after the selection is made.
*The SLEEP indicator will light up to indicate that the sleep timer is on.
EJECT | EJECT |
POWER
4 The unit will turn off automatically when the selected sleep time passes.
To confirm the sleep time settingPress the SLEEP button once. “SLEEP” appears on the display, and soon it is replaced by the remaining time of the selected sleep time.
To change the sleep timeSLEEP
POWER
|
| CD |
|
|
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | PRESET | |
6 | 7 | 8 | 9 | 0 |
A | B | C | D | E |
TIME | PROG | TAPE | EDIT | +I0 |
MODE | REPEAT | RANDOM | OPEN/CLOSE | TUNER |
DISC SKIP |
|
| STOP | PLAY/PAUSE |
REC/PAUSE | TAPE 1/2 | PLAY | STOP | PLAY |
CENTER/REAR | TEST | FLAT | TAPE | |
/DELAY | ||||
LEVEL | MUSIC | PROGRAM | USER | |
SLEEP |
| POWER |
| INPUT |
|
|
| ||
VOLUME
While the SLEEP indicator is being illuminated, press the SLEEP button repeatedly until the desired time appears.
To stop the sleep timer operationPress the POWER switch, or press the SLEEP button repeatedly until “OFF SLEEP” appears on the display. (The SLEEP indicator will go out.)
Using the timer and the sleep timer at the same time1 Prepare timer play. (See page 52 and 53.)
*Do not turn the power of this unit off after the timer setting is finished.
2 Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer begins functioning to turn the source on at the preset time.
Note
Do not make the timer time setting so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.)