2 1 1
MINI COMPONENT SYSTEM | DISC CHANGE |
|
OPEN/CLOSE
Your favorite pair of any equalizer mode (or an equalizer pattern of your own adjusting) and any sound field program can be stored as a user program. Up to 4 pairs can be stored as desired.
To store
1 Select a desired equalizer mode by pressing the MUSIC button.
1
2
DISC
PROGRAM
| SEEK |
| DISPLAY |
| PTY |
|
|
|
| START |
|
3 | MODE | EDIT |
|
|
| ||
| PS/PTY/RT/CT REPEAT |
|
|
| FREQ |
|
|
| RANDOM | VOLUME | |
PRESET/TUNING/BAND | A/B/C/D/E |
*If desired, adjust the equalizer as you prefer by using the equalizer control buttons.
2
USER
POWER
4, 2
MUSIC
PHONES
| CD |
| DOWN |
INPUT | INPUT |
DOWN | UP |
MEMORY
TAPE 1/2
MODE | REC/PAUSE | NORMAL | |
DOLBY NR |
| DUBBING | |
| TIMER REC | ||
AUTO/MAN’L | MEMORY | ||
| |||
TIMER |
| TIME ADJ | |
HOUR |
| MIN |
PLAYBACK 1 2 REC/PLAYBACK
USER
3, 5 | 1 2 |
| 3 4 |
UP
Active Servo
Technology
Select a desired sound field program by pressing the PROGRAM button.
3 Press the user program MEMORY button.
*“1” will flash on the user program number indicator and the MEMORY indicator will flash for about 5 seconds.
4 Select the user program number (1, 2, 3 or 4) to which you will store the selected modes by pressing the USER button once or more before “1” stops flashing.
EJECT
1
|
| CD |
|
|
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | PRESET | |
6 | 7 | 8 | 9 | 0 |
A | B | C | D | E |
TIME | PROG | TAPE | EDIT | +I0 |
MODE | REPEAT | RANDOM | OPEN/CLOSE | TUNER |
DISC SKIP |
|
| STOP | PLAY/PAUSE |
REC/PAUSE | TAPE 1/2 | PLAY | STOP | PLAY |
CENTER/REAR | TEST | FLAT | TAPE | |
/DELAY | ||||
LEVEL | MUSIC | PROGRAM | USER | |
SLEEP |
| POWER |
| INPUT |
|
|
| ||
EJECT
2
4, 2
*Whenever you press the USER button, the user program number changes and is displayed as follows.
USER 1 | USER 2 | US |
USER 4
5 Press the user program MEMORY button before the number selected in step 4 stops flashing.
*In the same way, store other pairs to other three user positions.
*It is also a good idea to store only an equalizer pattern of your own adjusting (without storing any sound field program).
Notes
• A new program can be stored in place of the former one. |
VOLUME
• In step 4 or 5, if the user program number indicator stops |
flashing before operation, return to step 3. |
To recall a user program
1 Play back a source. (For source playback, refer to the sections beginning on page 17.)
2 Press the USER button once or more so that the user program number you want to recall lights up.
*Whenever you press the USER button, the user program number changes and is displayed as follows.
USER 1 USER 2 USER 3
OFF