COMPACT DISC PLAYER OPERATION

To interrupt playback

1 Press the play/pause / button.

* The “ ” indicator will flash.

2 Press the play/pause / button to resume playback from the same point.

To stop playback

Press the stop button.

To switch the unit off after use

Turn the unit off by pressing the POWER switch. (The indicators will go off except for the current time display.)

Direct operation

When the power is off (in the standby mode), pressing the CD input selector button or the DISC selector (1, 2 or 3) button will turn the power on and start CD playback automatically.

When the power is on, even if an input source other than CD player is selected, pressing a DISC selector button or closing the disc table by pushing the front edge of the disc table gently will start playback directly. In this case, if the tape deck is playing back a tape, it will be stopped automatically.

*These ways of playback can also be used to close the disc table. If the table is closed in these ways, playback will begin automatically, however, the display will not show the total number of tracks and the total playing time of the disc to be played back.

PLAYXCHANGE

During playback, you can open the disc table by pressing the DISC CHANGE button without interrupting playback. However, in this case, pressing the DISC SKIP button or a DISC selector button has no effect.

Precautions

•If TV or radio interference occurs during CD player operation, move the unit away from the TV or radio.

•Subjecting the unit to shock or vibration can cause mistracking.

•Playing back some compact discs at high volume can cause mistracking. In this case, listen at lower volume.

•Do not pull open the disc table forcibly with your hands.

•Do not push the disc table while it is moving.

•If the power fails while the table is open, wait until the power supply returns or gently push the table manually to close it.

•The temperature range for playing back compact discs is recommended to be 5°C (41°F) – 35°C (95°F).

Direct-selection playback

 

 

CD

 

 

1

2

3

4

5

1

2

3

4

5

6

7

8

PRESET

6

7

8

9

0

A

B

C

D

E

TIME

PROG

TAPE

EDIT

+I0

MODE

REPEAT

RANDOM

OPEN/CLOSE

TUNER

DISC SKIP

 

 

STOP

PLAY/PAUSE

REC/PAUSE

TAPE 1/2

PLAY

STOP

PLAY

CENTER/REAR

TEST

FLAT

TAPE

/DELAY

 

 

LEVEL

MUSIC

PROGRAM

USER

SLEEP

 

POWER

 

INPUT

 

 

 

VOLUME

 

 

CD

 

 

1

2

3

4

5

1

2

3

4

5

6

7

8

 

PRESET

6

7

8

9

0

 

 

 

 

E

 

 

 

 

+I0

By using the track number input buttons on the remote control transmitter, any track you wish to listen to can be played back directly.

Use the track number input buttons to select the desired track number. Playback will begin automatically.

A. For example, to choose selection 5

Press the “5” button.

B. For example, to choose selection 12 (1)Press the “+10” button.

(2)Within 3 seconds, press “2” button.

C. For example, to choose selection 20 (1)Press the “+10” button.

(2)Within 3 seconds, press the “+10” button again. (3)Within 3 seconds, press the “0” button.

Note

If you select a track number higher than the number of tracks on the disc, playback will begin from the last track on the disc.

E-18