BASIC OPERATION

PLAYING A SOURCE

When using the remote control, press AMP(TUNER) on

4 Select the desired input

the component selector.

 

source with INPUT

 

 

 

SELECTOR (or the input

2

4

1,6

selector buttons). (Turn on

the TV monitor for video

 

 

 

 

 

 

sources.)

 

 

 

The name of the selected input

 

 

 

source appears for a moment

 

 

 

and the arrow for the selected

 

 

 

input source indicator lights up

– +

– +

 

on the display.

 

 

 

Front panel

or

Remote control

3

7

6

 

 

6

 

2

 

 

4

7

 

 

1 Set VOLUME to the “ m” position.

 

Front panel

2 Turn the power on.

 

 

or

Front panel

Remote control

3 Press SPEAKERS A or B

 

to select the main

 

speakers to be used.

Front panel

If you use two main speaker

 

systems, press both A and B.

 

Input source

a.To select a tape or an MD source

Press TAPE/MD MON / EXT.

DECODER (or TAPE/MD) so

that the “TAPE/MD

Front panel

 

MONITOR” indicator lights up

 

on the display.

 

b.To select a source connected to the EXTERNAL DECODER INPUT terminals

Press TAPE/MD MON / EXT. DECODER repeatedly (or EXT. DEC.) until “EXT. DECODER” appears on the display.

Notes

An audio source can not be played if the “TAPE/MD MONITOR” indicator lights up or if “EXT. DECODER” appears. Press TAPE/ MD MON / EXT. DECODER twice (or TAPE/MD once) to turn off the “TAPE/MD MONITOR” indicator. Press TAPE/MD MON / EXT. DECODER once (or EXT. DEC.) to turn off “EXT. DECODER”.

If you select and play a video source when the “TAPE/MD MONITOR” indicator lights up or “EXT. DECODER” appears, the play back result will be a video image from the video source and the sound from the audio source selected by using TAPE/MD MON / EXT. DECODER (or TAPE/MD or EXT. DEC.).

y

For the DVD/LD, TV/digital TV and satellite tuner sources, the current input mode is also shown. Refer to page 22 for details about the input mode.

20