TUNING
Manual Preset Tuning
You can also store up to 40 stations (5 groups x 8 stations) manually.
– | + | – | + |
3 4 2,5
1Tune in to the desired station.
Refer to page 28 for the tuning procedure.
2Press MEMORY.
The “MEMORY” indicator flashes for about five seconds.
Flashes
3Press A/B/C/D/E repeatedly to select the desired group (A to E) of preset stations before the “MEMORY” indicator goes off.
Make sure that “ z” appears on the display. The selected group appears on the display.
4Press PRESET/TUNING h or l to select a preset station number (1 to 8) with which you want to store the station before the “MEMORY” indicator goes off.
Press h to select a higher preset station number and l to select a lower preset station number.
5Press MEMORY before the “MEMORY” indicator goes off.
The displayed station has been stored as the preset group and number you have selected, and the reception band and frequency appear on the display.
6Repeat steps 1 to 5 to store other stations.
Notes
•A new setting can be stored in place of the former one.
•The reception mode (stereo or monaural) is stored along with the station frequency.
To Recall a Preset Station
You can recall any desired station simply by selecting the preset station number with which it was stored.
You can also recall a preset station with the remote control. Press AMP(TUNER) on the component selector and press TUNER on the input selector.
– | + | – | + |
1 2
1
2
1 Press A/B/C/D/E to select the required group of preset stations.
Make sure that “ z ” appears on the display.
or
Front panel | Remote control |
2Press PRESET/TUNING h or l (or PRESET
The preset group and number appear on the display along with the reception band, frequency and signal strength information.
or
Front panel |
| Remote control | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
30