SET MENU
8.DTS LFE (Adjusting the output level of the LFE channel for DTS)Control range:
Preset value: 0 dB
Note
•This adjustment is effective only when DTS is being decoded and the selected source encoded with DTS contains LFE signals.
This adjusts the output level of the LFE channel. If the LFE signals are mixed with signals of other channels and they are directed to the same speakers, the ratio of the LFE signal level to the level of the other signals can be adjusted.
9.CNTR DELAY (Adjusting the delay of the center sound)Control range: 0 ms to 5 ms (in 1 ms steps)
Preset value: 0 ms
Note
•This adjustment is only effective when Dolby Digital or DTS is being decoded and the selected source encoded with Dolby Digital or DTS contains center channel signals.
This adjusts the delay between the main sound (on the main channels) and dialog, etc. (on the center channel). The larger the value, the later the dialog, etc. is generated.
This makes sounds from the left main, center and right main speakers reach your listening position at the same time. This is achieved by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the right and left main speaker to your listening position.
Choices: ON/OFF
Preset position: OFF
If you wish to prevent accidental alterations to the settings of the SET MENU and other adjustments on this unit, select the ON position. The following settings on this unit can be locked:
•Settings of other items in the SET MENU
•Settings in the TIME/LEVEL mode
•Settings when using TEST
11.SAT INPUT (Selecting the initial input mode for a source connected to the
Choices: AUTO/LAST
Preset position: AUTO
The input mode for a source connected to the
AUTO
In this position, the input mode is always set to AUTO.
LAST
In this position, the input mode is automatically set to that selected the last time when the power of this unit was turned on.
36