CONNECTIONS

Before Connecting Components

CAUTION

Never connect this unit and other components to mains power until all connections between components have been completed.

Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different terminal names. Refer to the instructions for each component to be connected to this unit.

When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or changer), connect it to the terminals with the same number labels as !, #, $ etc. YAMAHA applies this labeling system to all its products.

Use RCA-type pin plug cables for connecting audio/video components with the exception described later.

The input and output terminals for pin plugs can be distinguished as follows:

Yellow

video signals (composite)

V

V

White

analog audio signals for the left channel

L

L

Red

analog audio signals for the right channel

R

R

 

coaxial digital signals

C

C

After completing all connections, check them again to make sure they are correct.

Connecting the Antenna

Connecting to an External

Connecting the Speakers

Connecting the Power

(pages 11 and 12)

Decoder (page 15)

(pages 16 and 17)

Supply Cords (page 18)

 

 

 

(U.S.A. model)

A

B

Connecting an Audio

Connecting a Video

IMPEDANCE SELECTOR

Component (page 13)

Component (pages 14 and 15)

switch (page 18)

10