Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha HTR-5250 ■Outdoor AM antenna, ■Ground (GND terminal), ■AM loop antenna (included), ■Connecting the AM loop antenna

1 67

Download 67 pages, 3.97 Mb

CONNECTIONS

■AM loop antenna (included)

AM loop antenna

■Connecting the AM loop antenna

2 1

3

45

Antenna stand

■Outdoor AM antenna

Vinyl covered wire (5 m to 10 m)

■Ground (GND terminal)

The AM loop antenna can be removed from the stand and attached to a wall, etc. However, note that the reception sensitivity may deteriorate if the antenna is attached to a metal or steel reinforced wall.

Notes

•The AM loop antenna should be placed away from this unit.

•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

1Press the tab and unlock the terminal hole.

2Insert the AM loop antenna lead wires into the AM ANT and GND terminals.

3Return the tab to its original position to lock the lead wires. Lightly pull the lead wires to confirm a good connection.

4Attach the loop antenna to the antenna stand.

5Orient the AM loop antenna so that the best reception is obtained.

If you cannot obtain good reception with the AM loop antenna, connect 5 m to 10 m of vinyl covered wire to the AM ANT terminal and extend it outdoors from a window.

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

12

Contents

Page SAFETY INSTRUCTIONS FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime CAUTION: READ THIS BEFORE OPERATING YOUR UNIT FEATURESCONTENTS GETTING STARTED Checking the Package Contents Control Battery Replacement Using the Remote Control CONTROLS AND FUNCTIONS Front Panel Page Display Remote Control Description of the Numeric Buttons ■When selecting an input source ■When selecting a preset station number SPEAKER SETUP Speakers to Be Used Speaker Placement CONNECTIONS Before Connecting Components Connecting the Antennas ■AM loop antenna (included) ■Connecting the AM loop antenna ■Outdoor AM antenna ■Ground (GND terminal) Connecting an Audio Component Connecting a Video Component ■VIDEO terminals (composite) ■VIDEO AUX terminals (on the front panel) Connecting to an External Decoder Connecting the Speakers ■Speaker cables ■Connecting to the MAIN SPEAKERS terminals ■Connecting to the REAR and CENTER SPEAKERS terminals ■Connecting to an external amplifier IMPEDANCE SELECTOR Switch Connecting the Power Supply Cords ADJUSTING THE SPEAKER BALANCE Before You Start Adjusting Using the Test Tone Page PLAYING A SOURCE ■To mute the sound ■When you have finished using this unit ■BGV (background video) function ■AUTO ■DTS ■ANALOG ■Switching the input mode ■Notes on playing a source encoded with DTS ■Notes on playing an LD source ■Notes on the digital signal DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT Selecting a DSP Program Canceling the Sound Effect (turning off the effect speakers) TUNING Automatic Tuning Manual Tuning Automatic Preset Tuning (for FM stations only) Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE SOUND FIELD PROGRAM Page ■For Hi-Fiaudio sources CINEMA DSP: Dolby Surround + DSP/Dolby Digital + DSP/DTS + DSP ■Dolby Pro Logic + 2 digital sound fields ■Dolby Digital or DTS + 3 digital sound fields SET MENU Description of Each Item 5. MAIN LVL 6.D.D. LFE (Adjusting the output level of the LFE channel for Dolby Digital) 7.D-RANGE(Adjusting the dynamic range) 8.DTS LFE (Adjusting the output level of the LFE channel for DTS) 9.CNTR DELAY (Adjusting the delay of the sound from the center speaker) 10.MEM. GUARD (Locking the settings) DELAY TIME AND SPEAKER OUTPUT LEVELS Delay Time Sound Output Level of the Center Right Rear and Left Rear Speakers and Subwoofer Adjusting Method SLEEP TIMER Setting the SLEEP Timer Canceling the Selected SLEEP Timer PRESET REMOTE CONTROL Selector Dial Commonly used buttons in any position of the selector dial Controlling the Components Connected to This Unit Description of Each Position ■CD position ■DVD/LD position ■DVD MENU position ■VCR position ■CBL/SAT position ■TV position Advanced Information ■Returning to the factory-setcodes TROUBLESHOOTING Page ■ Tuner ■Remote control ■ Others ■When playing back a source encoded with DTS SPECIFICATIONS GLOSSARY INDEX LIST OF MANUFACTURER’S CODES LISTES DES CODES FABRICANT