ADJUSTING THE SPEAKER BALANCE

4 Adjust BALANCE on the front panel so that the sound output level of the

LR

Front panel

7When the adjustment is complete, press TEST.

“TEST OFF” appears on the display and the test tone stops.

right main speaker and the left main speaker is the same.

5Press TIME/LEVEL

repeatedly to select the speaker to be adjusted.

“CENTER”, “R SUR.” or “L SUR.” appears on the display.

y

After pressing TIME/LEVEL once, you can also select the item by pressing d. (Pressing u changes the selection in the reverse order.)

6Press i to raise and j to

lower the level. Adjust the sound output levels of the center speaker and the rear speakers so that they become almost the same as that of the main speakers.

While adjusting, the test tone is heard from the selected speaker.

Note

•You cannot adjust the delay time while the test tone is being heard even if “DELAY” appears on the display.

Note

•If “CENTER SP” on the SET MENU is set to the NONE position, the sound output level of the center speaker cannot be adjusted in step 6. The center channel sound is automatically output from the right and left main speakers.

y

•Once you have completed the adjustments, you can only adjust the overall volume level of your audio system by using VOLUME (or VOLUME (+/–)).

•If you use external amplifiers, you may also use their volume controls to achieve the proper balance.

•If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting “MAIN LVL” on the SET MENU to “–10 dB”. (Refer to page 37 for details.)

20