DELAY TIME AND SPEAKER OUTPUT LEVELS

When using the digital sound field processor with the Dolby Pro Logic decoder, Dolby Digital decoder or DTS decoder, you can adjust the delay time between the main sound and sound effect, and each speaker’s output level as you wish.

Note

•When high-rate 96-kHz sampling 24-bit digital signals are input to this unit, the delay time and speaker output levels cannot be adjusted.

Delay Time

You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is generated. The delay time can be individually adjusted to all DSP programs.

Notes

•Adding too much delay will cause an unnatural effect with some sources.

•The sound is momentarily interrupted while adjusting the delay time.

 

 

Program

Control

Preset

 

 

range (ms)

value

 

 

 

 

 

 

 

 

 

1.

PRO LOGIC/Normal

15 to 30

20

 

 

 

 

 

 

 

DOLBY DIGITAL/Normal

0 to 15

5

 

 

 

 

 

 

 

DTS DGTL SUR/Normal

0 to 15

5

 

 

 

 

 

 

 

PRO LOGIC/ENHANCED

15 to 30

20

 

 

 

 

 

 

 

DOLBY DIGITAL/ENHANCED

0 to 15

5

 

 

 

 

 

 

 

DTS DGTL SUR/ENHANCED

0 to 15

5

 

 

 

 

 

 

 

 

2.

70 mm SPECTACLE

15 to 30

23

 

 

 

 

 

 

 

DGTL SPECTACLE

1 to 99

15

 

 

 

 

 

 

 

DTS SPECTACLE

1 to 99

15

 

 

 

 

 

 

 

70 mm SCI-FI

15 to 30

20

 

 

 

 

 

 

 

DGTL SCI-FI

1 to 99

16

 

 

 

 

 

 

 

DTS SCI-FI

1 to 99

16

 

 

 

 

 

 

 

 

3.

70 mm ADVENTURE

15 to 30

20

 

 

DGTL ADVENTURE

1 to 99

15

 

 

 

 

 

 

 

DTS ADVENTURE

1 to 99

15

 

 

 

 

 

 

 

70 mm GENERAL

15 to 30

20

 

 

 

 

 

 

 

DGTL GENERAL

1 to 99

15

 

 

 

 

 

 

 

DTS GENERAL

1 to 99

15

 

 

 

 

 

 

 

 

4.

MONO MOVIE

1 to 99

49

 

 

 

 

 

 

5.

TV SPORTS

1 to 99

9

 

 

 

 

 

 

6.

DISCO

1 to 99

40

 

 

 

 

 

 

7.

ROCK CONCERT

1 to 99

16

 

 

 

 

 

 

8.

CONCERT HALL

1 to 99

44

 

 

 

 

 

Sound Output Level of the Center,

Right Rear and Left Rear Speakers,

and Subwoofer

If desired, you can adjust the sound output level of each speaker even if it has already been adjusted in “ADJUSTING THE SPEAKER BALANCE” on pages 19 and 20.

Notes

•The sound output level of the center speaker cannot be adjusted when the input signal is analog, PCM audio, or encoded with Dolby Digital in 2-channel.

•If “CENTER SP” on the SET MENU is set to the NONE position, the sound output level of the center speaker cannot be adjusted. This is because the center channel sound is automatically output from the right and left main speakers.

•Once the sound output level has been adjusted, the level will be the same for all DSP programs.

Speaker

Control range (dB)

Preset value

 

 

 

Center

MIN, –20 to +10

0

 

 

 

Right rear

MIN, –20 to +10

0

 

 

 

Left rear

MIN, –20 to +10

0

 

 

 

Subwoofer

MIN, –20 to 0

0

 

 

 

OPERATION ADVANCED

English

39